Danfoss 102 Instructions d'installation et d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et d'utilisation pour {nom_de_la_catégorie} Danfoss 102. Danfoss 102 12 pages. Gp programmers & timeswitches for time control of domestic central heating systems
Également pour Danfoss 102 : Instructions d'installation et de câblage (2 pages), Instructions pour l'utilisateur (2 pages)
Imprimer la page
Example:
If you want your system ON between 8am and 10am
and again between 4pm and 11pm, set the tappets as
shown. (A to 8, B to 10, C to 16, D to 23).
Remember:
Red tappets (A and C) switch ON
Blue tappets (B and D) switch OFF
3.
Ensure that the installer has removed the protective
tape covering the pre-selector wheel.
4.
Using the dial knob, rotate the dial completely at least
twice, clockwise only, to clear the mechanism.
A = 1st ON
B = 1st OFF
C = 2nd ON
D = 2nd OFF
9