Danfoss PVEU-SP Manuel d'installation
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Danfoss PVEU-SP. Danfoss PVEU-SP 8 pages. Electrical actuating module for pvg 32 and pvg 100
Imprimer la page
Installation Guide
Electrical Actuating Module
PVE series 4 for PVG 32 and PVG 100
PVE for PVG 32 and PVG 100:
Oliestrømmens retning for
standard monterede grupper.
Oil flow direction for standard
assembled groups.
Richtung des Ölstroms für
Standard-Baugruppen.
Sens du débit pour ensembles
standard.
For Technical Information, see Danfoss.com.
Mounting PVE
Instruktionen dækker
Instruction covers
Anleitung umfasst
l'instruction couvre
Danfoss actuators PVEA, PVEH, PVEM, PVEO, PVEP,
PVES, PVEU Variants -R, -DI, -SP, -F.
Connectors Deutsch, AMP, DIN/Hirschmann.
For full documentation see
Series 4 for PVG 32, PVG 100 and PVG 120,
www. Danfoss.com
• Protect LVDT-pin if present
• Ensure O-rings are in place
• Ensure gasket when using AMP and DIN/Hirschmann connector
• Do not over torque
WWarning
PVEA is not for use on PVG 100.
© Danfoss, 2014-03
Technical Information, PVE
520L0553 on
520L0619 • Rev EB • Mar 2014
to application
to tank
8 ±0.5 N•m
[70 ±4.4 lbf•in]
5 [0.2]
V310115.A
P→A
V310348A
157-743.10B
1