Danfoss TERMIX PM2+P Manuel d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Danfoss TERMIX PM2+P. Danfoss TERMIX PM2+P 16 pages. Self-acting controllers integrated to heat exchanger
Également pour Danfoss TERMIX PM2+P : Manuel d'installation (12 pages), Manuel d'instructions (6 pages)
Imprimer la page
Installation Guide
4.0 Mounting
4.1 Mounting
Installation must be in compliance with local standards and
regulations.
District heating (DH) - In the following sections, DH refers to the
heat source which supplies the substations. A variety of energy
sources, such as oil, gas or solar power, could be used as the
primary supply to Danfoss substations. For the sake of simplicity,
DH can be taken to mean the primary supply.
Connections:
1. Domestic cold water (DCW)
2. Domestic hot water (DHW)
3. District heating (DH) supply
4. District heating (DH) return
Connection sizes:
DH:
G ¾" (ext. thread)
DCW + DHW:
G ¾" (ext. thread)
Dimensions (mm):
Type 1 + 2 with insulation:
H 450 x W 300x D 155
Type 1 + 2 with cover:
H 470 x W 315 x D 155
Weight incl. cover: 7–9 kg (incl. packing)
Danfoss District Energy
Termix Water heater – PM2+P
VI.GE.O2.02 / LUK38042
Authorized personnel only
Assembly, start-up and maintenance work must be performed by
qualified and authorized personnel only.
The pipe placement can deviate from the shown drawing. Please note
the markings on the station.
DEN-GT
5