AODELAN WTR-2R Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AODELAN WTR-2R. AODELAN WTR-2R 19 pages. Wireless timer remote shutter release

Imprimer la page
AODELAN WTR-2R Manuel de l'utilisateur
Inserting batteries into WTR-2(T) / WTR-2(R) or
TRS-1
1. Press the battery cover in while pushing it away from
the unit. The battery cover will slide open.
2. Remove the battery cover.
3. Insert the AAA batteries in the positive and negative
directions as indicated in the battery compartment.
4. Replace the battery cover and push back into the
locked position.
Turning WTR-2(T) / WTR-2(R) or TRS-1 on/off
1. To turn on the unit – press and hold the Power Button
for 2 seconds.
2. To turn off the unit – press and hold the Power Button
for 2 seconds.
3. The Timer WTR-2(T) or TRS-1 will beep and images
will appear on the LCD screen when the unit powers
on.
4. The Receiver WTR-2(R)'s LED will flash green then
red when the unit powers on. The LED will continue to
flash green when the unit is on.
Turning the sound on/off for WTR-2(T) or TRS-1
1. By default sounds on the Timer WTR-2(T) or TRS-1
unit are on. You will hear audible beeps when it is first
powered on, when starting and stopping programs or
when a photo is taken.
2. When the sound function is enabled a musical symbol
is visible on the LCD.
3. To disable sound press and hold the Sound/Mode
Button until the sound symbol disappears.
• 7 •