AODELAN WM2 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AODELAN WM2. AODELAN WM2 12 pages.

Imprimer la page
Connecting the receiver to a camera
Via 3.5mm TRS audio cable
1. Turn off the receiver and camera.
2. Insert the clip on the back of the receiver into the hot shoe on the top of the camera.
3. Insert one end of the TRS audio cable into the external microphone jack of the camera (usually
marked as MIC).
4. Insert the other end of the TRS audio cable into the "LINE OUT" jack of the receiver.
5. Connect the monitor earphone to the earphone jack
required.
Precautions for Use
 Do not mix the audio cables. Refer to the difference of audio cables in [Parts and Functions] _
[Accessories].
 The receiver and the camera are connected and communicated through the audio cable. If a
speedlite needs to be attached on the hot shoe of the camera, you can remove the receiver
from the hot shoe of the camera and install it in another proper position, keeping the audio
cable connected.
 If you are using a camcorder, audio recorder or other audio/video recording device, connect the
device to the receiver through the 3.5mm TRS audio cable in the same way.
Connecting the receiver to a smartphone
Via 3.5mm TRRS audio cable
The receiver can also be connected to a smartphone to provide audio signal input for the
smartphone.
1. Turn off the receiver.
2. Insert the straight plug of the 3.5mm TRRS audio cable into the earphone jack of the
smartphone.
3. Insert the 90°plug of the 3.5mm TRRS audio cable into the "LINE OUT" jack of the receiver.
4. Connect the monitor earphone to the earphone jack
required.
of receiver if real-time monitoring is
of receiver if real-time monitoring is