Casella Apex2 PLUS Manuel de terrain - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de terrain pour {nom_de_la_catégorie} Casella Apex2 PLUS. Casella Apex2 PLUS 10 pages. Personal sampling pump

Imprimer la page

Switching the Apex2 On and Off

To switch the Apex2™ on, press the on/off key

start-up screens followed by the Stop mode screens detailing the last run data.

To power off the Apex2 from any screen when the pump is not running, press and hold the

key for 3 seconds. Countdown screens will be displayed:-

Key Lock Modes

The Apex2 can be set to operate in Partial Lock or Fully Locked modes:

Whilst pressing and holding the Up < > key, press the

enter key <

> 3 times in quick succession to toggle

between the different 'LOCK' options.

Partial lock is identified by the open padlock and may be

activated in both Run or Stop modes. In the partial Lock

mode the wearer may only start or stop a sampling run but

cannot access other menus or functions. The wearer is

prevented from resetting values or changing the flow rate.

Full lock mode can only be activated once the pump is

already sampling in a run mode and is identified by a closed

padlock icon. In Full lock mode the keypad is fully de-

activated until it is unlocked again. The wearer cannot stop

the pump.

. At power up, the pump will display the