Abus eyseo TV7145 Manuel d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Abus eyseo TV7145. Abus eyseo TV7145 12 pages. Waterproofed vario-focal ir video surveillance camera

Imprimer la page

7.3. Adjust focus and zoom

Using the adjustment tool to adjust focus and zoom

7.4. Fix the cover again using the fixing screw.

7.5. Place and fix the sunroof if used.

8. Installation

Proceed as follows when installing the camera.

1. Select a suitable place to mount the camera.

2. Connect the video cable (recommended cable type: RG59) with the BNC

video output (1) of the camera and with the output of the camera as the next connected device.

The maximum cable length must not exceed 200 m.

3. Connect a 12V DC voltage supply to the power input

of the camera (2).

4. Hold the camera at the location where you want to mount it later.

change. Check the orientation and angle of the camera.

5. Fasten the supplied wall or ceiling mount (4) to the desired installation location and

screw the mount into the camera housing (3).

6. Change the orientation of the camera holder if necessary by slightly loosening the fixing

screw (5) and changing the position as required. Then tighten the fixing screw so that the

camera remains in the desired position.

Important:

You can remove the sunroof by loosening the fixing screws (6).

A – Zoom

B – Focus