AoFrio Network Pro ONE Manuel du produit - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} AoFrio Network Pro ONE. AoFrio Network Pro ONE 14 pages.
Également pour AoFrio Network Pro ONE : Manuel d'installation (16 pages)

Imprimer la page

Warnings

Installation

The Network Pro ONE is mains electricity powered and therefore the

installation should only be performed by people that have the

appropriate qualifications in the country of installation.

The Network Pro ONE must only be installed and configured by

trained and authorized staff. Please follow the instructions provided in

this Guide otherwise the warranty may be void.

USB-C port

Do not connect anything to the USB-C port. The port is a non-

standard USB-C and is only intended to be used by AoFrio during

manufacturing. Connecting anything to this port may damage the

product and void the product warranty.

No serviceable parts

There are no serviceable parts inside the Network Pro ONE. Do not

attempt to open the housing. Opening of the electronics housing,

altering, or modifying the Network Pro ONE will invalidate the warranty

and damage the device.

Fit for purpose

The Network Pro ONE must only be used for the purposes and

functions described in this manual. While AoFrio may provide

technical support on suitable applications and configurations of the

Network Pro ONE (where such a relationship may exist), no liability,

responsibility or risk is accepted in determining if the Network Pro

ONE is fit for purpose for any particular application. No liability,

responsibility or risk is accepted by AoFrio for the operational function

of any particular installation or configuration.

Cellular connection, ownership, and activation

The Network Pro ONE

requires a cellular connection, either LTE-M or

to set up and upload data to the Cloud.

A cellular connection might not be available in all locations. The

presence of LTE does not guarantee LTE-M signal being available.

LTE-M is intended for low bandwidth Internet of Things (IoT) products

where LTE is for mobile high bandwidth applications.

Because this device is shipped in a non-active state, ownership is

established as part of the setup process where AoFrio adds the device

and owner to its database.

AoFrio hardware can be granted through User Roles within AoFrio's

User Manager software.

To use AoFrio's Field app as part of the configuration process, the

Network Pro ONE needs to be activated to the database that you are

working in and registered in the Cloud. If not activated, then it's

possible you won't be able to see the device in the Field app's list of

available devices.

Permission to manage pairing with other

Important do's and

don'ts:

•

Only authorised and

appropriately qualifed staff

should install the Network

Pro ONE.

Do not connect anything to the

•

USB-C port.

•

There are no serviceable parts

inside the Network Pro ONE.

Do not open the housing.

•

The Network Pro ONE

•

must only be used for the

purposes described in

this manual.

The Network Pro ONE requires a

•

clear cellular connection

Each device needs to be

•

registered with AoFrio as part of

setup and activated to the correct

database

•

Pairing requires additional user

role permissions through User

Manager.