Danfoss vlt soft starter mcd 500 Manuel d'instructions d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Danfoss vlt soft starter mcd 500. Danfoss vlt soft starter mcd 500 17 pages. Usb module
Également pour Danfoss vlt soft starter mcd 500 : Manuel d'instructions d'installation (6 pages), Instructions d'installation (5 pages)
Imprimer la page
MCD Modbus Module Instructions
5. Network Status LED
The Network Status LED indicates the state of the
communications link between the module and the network.
LED operation is as follows:
Off
No connection or soft starter not
powered up
On
Communication active
N.B.!:
If communication is inactive, the soft starter may trip if the Communications Timeout
function has been set on the module. When communication is restored, the soft starter
will require a Reset.
MG.17.F5.02 - VLT® is a registered Danfoss trademark
LED
Flashing
Communication inactive
Network Status LED
3