Dunavox DAUF-40.138SS Manuel d'instruction - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Dunavox DAUF-40.138SS. Dunavox DAUF-40.138SS 15 pages.
Imprimer la page
The door will not
close properly.
Display "E0", "E1".
"E2", "E3", "E4",
"E5", "E6" or "E7".
The alarm sounds
and
the
temperature
display flashes.
The icon "--" is lit
up and flashing in
the temperature
display.
The display window
is shown with "HH"
or "LL" instead of a
digital figure,
and/or with
continuous buzz
sound.
WARRANTY
The warranty does not cover:
1.
Damage in transit or when moving the appliance.
2.
Any damages caused from negligence, accident, improper use, improper installation/service or
use for purposes other than those described in the instruction manual.
3.
Damage caused by connecting your product to the wrong power source.
4.
Damage from power failure.
5.
Faulty installation or modification made during installation.
6.
Damage caused by unauthorized repair.
7.
Any damages resulting from force majeure, fire disaster or natural disaster.
8.
Alterations to the product without express permission from the manufacturer.
9.
Parts such as light, removable shelves, or plastic.
•
The appliance is not properly level.
•
The door was reversed and not properly
installed.
•
The gasket is dirty.
•
The shelves are out of position.
"E0" indicates the communication error for 3
zone models.
•
"E1" or "E2" indicates that the air
temperature sensor is failed.
•
"E3" or "E4" indicates that the defrost sensor
in the evaporator is failed.
•
"E5" indicates the defrost heater failure.
•
"E6" indicates the solenoid valve failure.
•
"E7" indicates the door switch failure.
•
Has the appliance door been open for longer
than 60 seconds? If not, then the
temperature has risen higher or fallen lower
than the temperature that has been set. This
could be due to:
•
The appliance door being opened too often.
•
The ventilation opening being covered or too
dusty.
•
A lengthy interruption to the power supply.
•
A large amount of bottles has been added to
the unit.
The display temperature is out of the range.
The temperature probe is out of order
•
Level the appliance with the
adjustable feet.
•
Check the door hinge and
reassemble correctly.
•
Clean the door gasket.
•
Check the shelves and refit
correctly.
Call for service.
•
If yes, close the door.
•
Do not open the door more often
than necessary.
•
Clear the obstructions and clean
the dust.
•
Leave the appliance to work for a
while until the set temperature
has been reached.
Only temperatures within the range
0~99°F/-9~37°C the appliance
can display will be shown. If the
temperature is not within this
range, the icon "--" will be
displayed instead. That is normal.
Call for service.