Dunavox DAVS-25.63 Manuel d'instruction - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Dunavox DAVS-25.63. Dunavox DAVS-25.63 16 pages.

Imprimer la page

OPERATING YOUR APPLIANCE

This appliance is designed for operation at certain

ambient temperatures. The climate class is specified on

the rating plate.

The appliance may not work properly if it is left for a long

period at a temperature outside the specified range. For

example, placing your unit in extreme cold or hot

conditions may cause interior temperatures to fluctuate.

The range between 5ºC and 20ºC (41ºF and 68ºF)*****

may not be reached.

Climate class

Ambient room temperatures

+10°C to +32°C

+16°C to +32°C

+16°C to +38°C

+16°C to +43°C

NOTE: Units with no heater will not raise their internal

temperature if the ambient temperature where the unit is

located is lower than the set temperature.

NOTE:

•

When you use the appliance for the

first time or restart the appliance after

having been shut off for a long time,

there

could be a few degrees

variance between the temperature

you select and the one indicated on

the LED readout. This is normal and

it is due to the length of the activation

time. Once the unit is running for a

few hours everything will be back to

normal.

•

If the unit is unplugged, power lost,

or turned off, you must wait 3 to 5

minutes before restarting the unit. If

you attempt to restart before this time

delay, the unit will not start.

USE AND CONTROL – SINGLE ZONE

The Controls of Your Unit

POWER

To turn the appliance off, press and hold the

seconds until temperature display goes out. To turn the

appliance on, press and hold the

temperature display lights up.

NOTE: Pressing the

audible alarm when the alarm is on.

key for 5

key for 1 second until

key once can switch off the

LIGHT

Used to turn the inner light on/off.

Used to increase (warm) the set temperature by 1°C/1ºF.

DOWN

Used to decrease (cool) the set temperature by 1°C/1ºF.

Display

Display the digital temperature and service indicators.

Indicator Light

The indicator light is located at the right lower corner of

the display. The indicator light will be on when the multi-

key function is selected.

To perform the multikey function, press and hold the first

key, then press the other key for at least 5 seconds and

then release all the keys.

ºF/ºC Selector

Select the temperature display setting in Fahrenheit or

Celsius degree. To change the temperature from

Fahrenheit to Celsius or from Celsius to Fahrenheit,

press and hold the LIGHT key for 5 seconds.

Key Lock (Only for models with outside controls) After 2

minutes or longer without pressing any key, the key lock

will be activated automatically. To remove the lock, press

the UP and DOWN keys at the same time for at least 5

seconds and the indicator light will flash three times to

confirm the action.

Setting the Temperature Control

•

The unit has single temperature zone. The

temperature can be set between 5ºC and 20ºC (41ºF

and 68ºF)***** which is ideal for storing red, white or

sparkling wine.

•

When the unit is plugged in for the first time, the unit

will power up automatically to the preset defaults.

The temperature preset at the factory is 12°C (54ºF).

•

You can set the temperature as required by pressing

the UP or DOWN key. When you press the two keys

at the first time, the display will show the last

temperature set previously. The temperature will

increase 1°C/1ºF if you press the UP key once, or

the temperature will decrease 1°C/1ºF if you press

the DOWN key once. The display flashes while you

make the setting.

•

After the temperature has been set, the display

shows the current inner temperature.

•

To view the set temperature at any time, press the

UP or DOWN key, the set temperature will

temporarily flash in the display for 5 seconds. Then

the display shows the current inner temperature

again.