CashConcepts CCE 140 Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} CashConcepts CCE 140. CashConcepts CCE 140 18 pages. Electronic counterfeit money detector
Également pour CashConcepts CCE 140 : Manuel de l'utilisateur (9 pages)

Imprimer la page

CCE – Cash Concepts Europe GmbH

Kemptener Straße 99 – D-88131 Lindau / Germany

Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20

Email: [email protected] / Web: www.cce.gmbh

Setting and function

You can set the CCE 140 for your requirements.

Issue Direction

You have the selection at the CCE 140 that accepted banknotes are

returned from the input tray or to eject from the rear output shaft.

Banknotes that are viewed by the device as counterfeit suspicious, are

generally thrown out by the input shaft, along with an error message

and a beep. By using the DIR button you can change the output

direction. The arrows on the left side of the display show the currently

selected direction of ejection.

Print-Funktion (Optional – not retrofit)

If you want to print the results of the test, hold the STA - button for

about two seconds. The display then shows the message "Print ....".

After printing, the device automatically switches back to test mode. If

the device should be equipped with the optional serial number

reading, the serial numbers of banknotes are printed together with

the counting result.

Currency

The CCE 140 is equipped as standard with programming EURO and

U.S. dollars and other currencies selectable. Keep the CUR - button

pressed for about 2 seconds to enter the currency menu and display

the list of available currencies.

On the left you will see the available currencies and on the right side

the currencies that can be tested with the current setting. Pressing

the CUR key, you can switch through the right combination of

currency in the display. Euros and U.S. Dollars can't be deselected.

Have you found your combination and it will appear in the right

display area, you can by pressing (for about 2 seconds) store the CUR

key setting. Press the STA button to exit the menu without saving.