CashConcepts LXD 50 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CashConcepts LXD 50. CashConcepts LXD 50 10 pages.
Également pour CashConcepts LXD 50 : Manuel de l'utilisateur (2 pages)

Imprimer la page
CashConcepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: [email protected] / Web: www.cce.tm
Total & Error Display
Total Display
Press and hold down
VALUE LIST is shown.
It shows the denomination information of the
counted notes. (Number of denomination, value per
denomination, total number of banknotes and total
value of banknotes)
By pressing the
the report on the optional thermal printer. By
pressing
CLEAR
Error Display
Press and hold down
REPORT is shown.
It displays the detailed information of rejected
banknotes.
Cleaning / Maintenance
The LXD 50 is equipped with a comprehensive error management to inform you about problems by the counting process and
the counterfeit money recognition and also for the soiling of sensors. Please note particular the tips to exclude to the cleaning of
the machine to avoid mistakes during the counting caused by dirtied sensors.
Cleaning of the sensors.
By the banknotes and by retreating dust it comes to depositions before the sensors of the machine. This pollution leads to
increased errors and non-recognitions of real banknotes.
Please clean at regular intervals the sensors of the LXD 50. Switch off the machine during the cleaning and
remove the net cable from the device.
With a soft paintbrush and cloth you can remove the coarse dust depositions from the sensors in the hopper and stacker are as
well as from the banknote conveyor wheels. To the cleaning of the counterfeit money sensors we recommend the additional
application of a non-inflammable air pressure spray around to remove also at inaccessible places dirt and particulate dust.
Please also remember of opening the back-sided flap (marked in
front side by pressing the unlock button (marked in
banknotes pass from dust and dirt, as well as jammed notes. For closing the machine you have to lift the blockade (marked in
GREEN
on the next photos)on the right side of the machine. Be careful not to pinch your finger. Should you have questions to
the right cleaning of the LXD 50, our service team is available to you of course with pleasure.
TOTAL
key until TOTAL
TOTAL
key again you can print out
you leave the report.
5/ERROR
key until ERROR
USD VALUE LIST
DENOM
USD 1
USD 2
USD 5
Total
Print (Key 7)
ERROR REPORT
DBL
SKW
SLIP
IR
BLUE
on the next photos) of the sensor bank. Also open the
RED
on the next photos). Now you can clean the complete way the
UNIT
VALUE
10
10
4
8
5
25
19
43
EXIT (C)
0
CHN
0
0
TIME
0
0
HALF
0
0
UV
0