Dunavox DXFH-48.130 Manuel d'instruction - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Dunavox DXFH-48.130. Dunavox DXFH-48.130 14 pages.

5.2. Installation of Your Wine Cooler

 This Wine Cooler is designed to be free standing installation only, and

should not be recessed or built-in (Fully recessed).

 Place your Wine Cooler on a surface that is strong enough to support it

when it is fully loaded.

 Allow 5 inches of space between the back and sides of the Wine Cooler,

which allows the proper air circulation to cool the heat sink.

 Locate the Wine Cooler away from direct sunlight and sources of heat

(stove, heater, radiator, etc.). Direct sunlight may affect the acrylic

coating and heat sources may increase electrical consumption. Extreme

cold ambient temperatures may also cause the unit not to perform

properly.

 This Wine Cooler uses thermoelectric refrigeration technology (no

compressor) and is not designed for storage in hot areas like garages,

warehouses or outdoors since it is designed to operate at a maximum of

30 degrees below the ambient temperature.

 Avoid locating the unit in moist areas.

 Plug the Wine Cooler into an exclusive, properly installed-grounded wall

outlet. Do not under any circumstances cut or remove the third (ground)

prong from the power cord. Any questions concerning power and/or

grounding should be directed toward a certified electrician or an

authorized service center.

 After plugging the Wine Cooler into a wall outlet, allow the unit to cool

down for 2-3 hours before placing any items in the compartment.

INSTRUCTION MANUAL

134