Duncan Killing Floor Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Duncan Killing Floor. Duncan Killing Floor 12 pages. High gain boost
Imprimer la page
Specifications:
Type of circuitry: The Killing Floor uses a hybrid J-FET/Op-Amp, optimized for low
order harmonics
Bypass: True hard-wire bypass
Control Functionality:
Gain Control Range – 0dB to 34dB
Voicing Switch:
Up – High Boost, 7 dB @ 10 kHz
Middle – Flat Response
Down – High Cut, 1st order, -3dB @4.8 kHz
Bypass (Footswitch) – Engages the boost effect
Input Impedance: 1M Ohm
Output Impedance: 1K Ohms
THD @ 1 Vo: 1.2% - all 2nd harmonic
Noise referred to input: 120dBV (with Gain set for 34dB)
Power: 9V battery or external 9V to 18V Regulated DC Adapter (center negative)
Current Consumption: 3.7mA in active mode, 2.2mA in bypass mode
Dimensions: 2.61" X 4.90" X 1.40"
Weight: 0.8lb. without battery, 0.9lb. with battery