Cashino PDM-02 Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cashino PDM-02. Cashino PDM-02 15 pages. Mobile impact dot matrix printer

Imprimer la page

PDM-02 user manual

6.5 Printer self-inspection

After obtaining printer users, can at any time to self-inspection of printer, to detect the

current printer Settings and status. Self-checking method is as follows: turn it off, if

printing machine was on, and then hold the paper feed button, then boot (press the

power button), and then walk paper release button, and a printer that prints out the

current status and printer setup.

6.6 tear-off

Each document after printing, need to tear documents from the paper roll off, printer

designed the teeth for tearing,Please do not force a degree to tear the

paper,excessive force may cause printing paper is pulled out from the paper space.

6.7 The use of the battery and charging

Printer in use after a period of time, the printer battery power of the light, when the

printer battery power has been nearly finished, if some of the printer to print data, a

printer is given by means of power light red power alarm, with will send three ring; If

the printer in a dormant state, the printer automatically shut off the power after send

three ring. Users need to printer recharged at this time. Charging method is as follows:

insert the plug in the printer power socket, then insert the plug of the ac input power

adapter into 220 v, 50 hz power supply plug, printers start charging. Charging process,

the printer rechargeable lights up, when the battery is full, rechargeable lights. The

time needed for charging in three hours. In the process of charging, such as using the

printer to print data will extend the charging time.

6.8Preprinted black mark specification

If user wants to locate receipt by detecting preprinted black mark, shall accord to the

following specification for the black mark. Otherwise it may cause printer can't

recognize the black mark.

Printing position: black mark shall preprint at the left side of receipt.

Width rang：≥7mm

Height：4mm≤height≤6mm

Reflection rate to IR：<10% （reflection rate to the black mark on paper >65% ）

Hps：Hps indicates the distance from down edge of detecting mark from beginning

line.

0mm≤Hps≤1mm