AOMWAY Nexus V2 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AOMWAY Nexus V2. AOMWAY Nexus V2 9 pages. Full hd digital link

Imprimer la page

AOMWAY

> When the TF card is full or there is a card error, the recording process will

be stopped

7. Digital HD Link Operation

> Transmitter and Receiver unit already bind together (factory setting).

Manual re-binding process:

Firstly, power on the receiver and then press BUT2 key for 10s, waiting

LED1 and LED2 slow flash (one flash per second), and then release the

key, it will enter into binding status. Secondly, power on the transmitter

and press BUT key for 10s, waiting both LED indicator to do slow flash,

and then release the key, it will enter into binding status. When both LED

lights on transmitter and receiver start to quick flash, it means binding

process is completed, now you will need to restart the transmitter and

receiver for normal use.

> The blue LED light on Transmitter and Receiver is made for data

communication status. Quick flash indicates normal status; slow flash

(one flash in 3s) indicates no signal input; LED light off for malfunction

and data communication is ended.

> Once the binding process is finished, restart the device will still keep the

link.

8. Menu Selection

Long press BUT1 key for 3s to enter or quit menu, short press will change

settings. Short press BUT2 will do downward selection of menu option (cycle

operation).

RC Vision System