Cashmaster Sigma 170 Manuel de démarrage rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cashmaster Sigma 170. Cashmaster Sigma 170 2 pages.
Également pour Cashmaster Sigma 170 : Manuel de démarrage rapide (2 pages), Manuel des questions fréquemment posées (7 pages), Manuel des questions fréquemment posées (9 pages), Manuel des questions fréquemment posées (6 pages), Manuel des questions fréquemment posées (9 pages)
Imprimer la page
Loose Coins
Ensure that the display indicates coin counting mode.
Press either coin
1. Place all coins of your selected denomination in the sccop and onto the tray.
2a. If auto-add is on, remove the scoop from the tray, and advance to the next denomination.
2b. If auto-add is off, press the
Rolled Coins
Ensure that the display indicates Rolled Coins counting mode.
Press the Rolled Coins
1. Place a roll of coins on the tray.
2a. If the roll is "full" the Cashmaster will display the value. Go to step 3
2b. If there is "crossover" or the roll is not "full". You must then select the denomination of coin
Press to
select
Rolled
2c. If the roll is not "full" you must select the denomination using the coin
coins
Press the enter key to confirm. Go to step 3.
mode
3a. If auto-add is on and the roll is "full" the cashmaster will automatically add to total.
3b. If auto-add is on, and the roll is not full, press
3c. If auto-add is off, press the
Advance to the next denomination.
Loose Bills
Ensure that the display indicates bill counting mode
Press either bill
1. Place bills of the selected denomination on the tray (up to 30 at one time). Repeat until all
bills in denomination are on the tray.
2a. If auto-add is on, remove bills from the tray, and advance to the next denomination.
2b. If auto-add is off, press
Strapped Bills
Ensure that the display indicates strapped bill mode
Press the strapped bill
1. Use bill
tray.
Press to
2a. If auto-add is on and the strapped bills are "good" the value will automatically add to total.
select
Strapped
2b. If auto-add is off and the strapped bills are "good", press
bill mode
2c. If the strapped bills appears as "suspect", open the strapped bills and count in loose bill mode.
Advance to the next denomination.
10245A
using the coin
key to select bill counting mode and required the denomination.
key to select strapped bills counting mode and to select bundle/clipped.
key to select the required denomination, place the strapped bills on the
If the strapped bills are "good" then the value is displayed.
Customer Support (Toll Free): 1 - 877 - CASHMAS
www.cashmaster.com
key to select coin counting mode and required the denomination.
key to add to total, and advance to the next denomination.
key to select Rolled Coins counting mode.
. Press the enter key to confirm. Go to step 3.
key to accept the value and add the grand total.
key to add to total, and advance to the next denomination.
key to accept and add total.
key to accept and add to totals.
keys.