Danfoss VLT FC Series Manuel d'instructions d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Danfoss VLT FC Series. Danfoss VLT FC Series 6 pages. Igbt module replacement for d1h–d8h drives
Également pour Danfoss VLT FC Series : Manuel d'installation (12 pages), Manuel d'installation (8 pages), Manuel d'instructions d'installation (6 pages), Manuel d'instructions (11 pages), Manuel d'installation (6 pages)
Imprimer la page
Installation Instructions
For B1 and B2 frame sizes, motor and relay connections are
located under the drive fuse block. To access these
connectors, loosen the three T-20 screws and move the fuse
block out of the way.
The fuse block does not need to be disassembled.
Illustration 1.3 Frame B1
1
Input power
2
Loosen screws
3
Drive fuses
4
Loosen screw
5
Motor (remove fuse plate to connect)
6
Relays
Table 1.3 Legend to Illustration 1.3
2
VLT® FC Series Internal Fuse Replacement
Illustration 1.4 Frame B2
1
2
3
4
5
6
Table 1.4 Legend to Illustration 1.4
®
MI92D102 - VLT
is a registered Danfoss trademark
Drive fuses
Loosen screws
Relays
Motor (remove fuse plate to connect)
Loosen screw
Input power