Casio 1534 Manuel général

Parcourez en ligne ou téléchargez le pdf Manuel général pour {nom_de_la_catégorie} Casio 1534. Casio 1534 2 pages. Watches

Imprimer la page

Module No.1534

• Press C to change from mode to mode.

• After you perform an operation in any mode, pressing C returns to the Timekeeping Mode.

• Press D in any mode to illuminate the display.

Timekeeping Mode

ABOUT THE BACKLIGHT

When you switch the backlight function on, the backlight of the watch flashes whenever

alarm , countdown alarm or hourly time signal is sounding.

• The backlight of this watch employs an electro-luminescent (EL) light, which loses its

illuminating power after very long term use.

• Frequent use of the backlight shortens the battery life.

To switch the backlight function on and off

Backlight function on indicator

• The backlight function indicator remains on the display in all modes until you switch the

backlight function off.

• Pressing D at any time illuminates the display for about two seconds, regardless of the

backlight's on/off setting.

• The above operation controls operation of the backlight function only. It does not affect

operation of audible tones and signals.

TIMEKEEPING MODE

Month

Day of week

Date

Hour

Seconds

Minutes

PM indicator

4. While any other digits (besides seconds) are selected (flashing), press E to increase the

number. Holding down E changes the number at high speed.

• To switch between the 12-hour and 24-hour formats, press D D D D D while some digits are

flashing.

5. After you set the time and date, press A to return to the Timekeeping Mode.

• The day of the week is automatically set in accordance with the date.

• The date can be set within the range of January 1, 1995 to December 31, 2039.

• If you do not operate any button for a few minutes while a selection is flashing, the flashing

stops and the watch goes back to the Timekeeping Mode automatically.

Alarm on indicator

Mode indicator

Date

Month

Hour

Minutes

Hourly time signal

on indicator

• To set a 1-month alarm

Set the month, hour and minutes for the alarm time. Set "– –" for the date (see step 3

under "To set the alarm time"). This type of setting causes the alarm to sound every day

at the time you set, only during the month you set.

• To set a monthly alarm

Set the date, hour and minutes for the alarm time. Set "–" for the month (see step 3 under

"To set the alarm time"). This type of setting causes the alarm to sound every month at

the time you set, on the date you set.

Alarm Mode

In the Timekeeping Mode, hold down E for one or two

seconds to switch the backlight function on and off.

When you switch the backlight function on, an indicator

appears on the display as shown.

To set the time and date

1. Press A while in the Timekeeping Mode. The seconds

digits flash on the display because they are selected .

2. Press C to change the selection in the following

sequence.

Seconds

Hour

Date

Month

3. While the seconds digits are selected (flashing), press

E to reset the seconds to "00". If you press E while

the seconds count is in the range of 30 to 59, the

seconds are reset to "00" and 1 is added to the

minutes. If the seconds count is in the range of 00 to

29, the minutes count is unchanged.

ALARM MODE

You can set an alarm with hour, minutes, month, and

date. When the alarm is on, the alarm sounds for 20

seconds at the preset time. When the Hourly Time

Signal is on, the watch beeps every hour on the hour.

Alarm Types

The types of alarm you get depends on the information

you set.

• To set a daily alarm

Set the hour and minutes for the alarm time. Set "–" for

the month and "– –" for the date (see step 3 under "To

set the alarm time"). This type of setting causes the

alarm to sound every day at the time you set.

• To set a date alarm

Set the month, date, hour and minutes for the alarm

time. This type of setting causes the alarm to sound

at the specific time, on the specific date you set.

GENERAL GUIDE

Countdown Alarm Mode

To set the alarm time

1. Press A while in the Alarm Mode until the hour digits start to flash on the display. The

hour digits flash because they are selected .

• At this time the alarm is automatically switched on.

2. Press C to change the selection in the following sequence.

3. Press E to increase the selected digits. Holding down E changes the number at high

speed.

• The format (12-hour and 24-hour) of the alarm time matches the format you select for

normal timekeeping.

• When setting the alarm time using the 12-hour format, take care to set the time correctly

as morning or afternoon.

4. After you set the alarm time, press A to return to the Alarm Mode.

• If you do not operate any button for a few minutes while a selection is flashing, the flashing

stops and the watch goes back to the Alarm Mode automatically.

To stop the alarm

Press any button to stop the alarm after it starts to sound.

To switch an alarm and Hourly Time Signal on and off

Press E while in the Alarm Mode to change the status of an alarm (see "Alarm Types")

and Hourly Time Signal in the following sequence.

Both off

Minutes

Year

Mode indicator

Hours

3. Press E to increase the selected number. Holding down E changes the number at high speed.

• To set the starting value of the countdown time to 24 hours, set to 0:00' 00.

4. After you set the countdown time, press A to return to the Countdown Alarm Mode.

• If you do not operate any button for a few minutes while a selection is flashing, the flashing

stops and the watch goes back to the Countdown Alarm Mode automatically.

To use the countdown timer

1. Press E while in the Countdown Alarm Mode to start the countdown timer.

2. Press E again to stop the countdown timer.

• You can continue countdown timer operation by pressing E.

3. Stop the timer and then press A until the countdown time is reset to its starting value.

• When the end of the countdown is reached and auto repeat timing is off, the alarm sounds

for 10 seconds or until you stop the alarm by pressing any button. Countdown timing

stops, and the countdown time is automatically reset to its starting value after the alarm

stops.

To switch auto repeat timing on and off

Auto repeat on indicator

Hour

Minutes

Date

Month

Alarm only

Hourly Time Signal only

COUNTDOWN ALARM MODE

The countdown timer can be set within a range of 1

second to 24 hours. When the countdown reaches zero,

Current time

an alarm sounds for 10 seconds or until you press any

button.

To set the countdown time

1. Press A while in the Countdown Alarm Mode. The

hours digit flashes on the display because it is se-

lected .

2. Press C to change the selection in the following

sequence.

Seconds

Hours

Minutes

1. Press A while in the Countdown Alarm Mode. The

hours digit flashes on the display because it is se-

lected .

2. Press D to switch auto repeat on and off.

3. Press A to return to the Countdown Alarm Mode.

• When the end of the countdown is reached while auto

repeat is on, the alarm sounds, but the starting count-

down time is reset and countdown timing starts again

automatically whenever the countdown reaches zero.

You can stop timing by pressing E, and manually

reset to the starting countdown time by pressing A.

1534-1

Stopwatch Mode

Both on

Minutes

Seconds