Casio 2220 Manuel

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Casio 2220. Casio 2220 9 pages. Casio wrist camera watch manual

Imprimer la page

Module No. 2220

GETTING ACQUAINTED

Congratulations upon your selection of the CASIO Wrist Camera (this watch).

To get the most out of your purchase, be sure to read this manual carefully

and keep the manual and everything contained in the packages.

About This Manual

FRI

3‰

1 ‰ : 5 8

3 5

• VISUAL DATABANK is a trademark of CASIO COMPUTER CO., LTD.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss,

or any claims by third parties that may arise through the use of this

watch.

BEFORE USING THE WATCH...

Warning!

• Make sure you are in a safe place before operating the watch.

Do not try to record images, perform complex watch operations, or look at the

display of the watch while operating an automobile, motorcycle, or any other

vehicle. Doing so creates the risk of causing a serious traffic accident. When

you use the watch while walking, always keep aware of other people,

vehicular traffic, and surface conditions around you in order to prevent

accidents.

• Do not use the watch inside of an aircraft.

Never use the watch inside of an aircraft or in any other area where the use

of such devices is prohibited. Doing so creates the risk of accident.

• Always back up important data.

Rough handling of or damage to the watch can accidentally delete image

data in watch memory. Because of this, you should always keep back up

copies of your images on computer disk.

To set the time and date

FRI

3‰

1 ‰ : 5 8

3 5

Seconds

Hour

Contrast Setting

2. While a setting is flashing, use E (+) and B (–) to change it.

3. When everything is the way you want it, press A to exit the setting

screen.

• The watch's built-in full automatic calendar makes allowances for different

month lengths and leap years.

• The watch automatically exits the setting screen if you do not perform any

operation for about two minutes.

• The year can be set in the range of 2000 to 2039.

• Button operations are indicated using the

letters shown in the illustration.

• The sizes and positions of the characters

shown on the sample displays in this

manual may differ slightly from those that

actually appear on the display of your

watch.

• Each section of this manual provides you

with the information you need to perform

operations in each mode.

• When performing operations with this

watch, you must first enter the correct mode

(Camera Mode, Timekeeping Mode, etc.)

See "GENERAL GUIDE" for information

about maneuvering between modes.

1. In the Timekeeping Mode, hold down A

for about one second until the seconds

digits start to flash on the display. This

indicates the setting screen.

• Each press of D moves the flashing around

the setting screen in the sequence shown

below.

Minutes

Year

Month

12/24-hour Selection

Day

12-hour/24-hour Timekeeping

Pressing D while the day is flashing on the setting screen causes the

indicator for the current timekeeping format (12H or 24H) to flash on the

display. Each press of E at this time toggles between 12-hour (12H) and

24-hour (24H) timekeeping.

• The timekeeping format you select is applied in all modes.

• With the 12-hour format, the P (PM) indicator appears to the left of the hour

digits for times in the range of noon to 11:59 p.m. The A (AM) indicator

appears to the left of the hour digits for times in the range of midnight to

11:59 a.m.

• With the 24-hour format, times are indicated in the range of 0:00 to 23:59,

without any indicator.

Contrast Adjustment

Pressing of D while the timekeeping format indicator (12H or 24H) is flashing

causes the current contrast setting (example: CNT3 = Level 3) to appear on

the display, with the level value flashing. Use B (darker) and E (lighter) to

adjust the contrast to any one of the seven available levels.

Note

• The contrast setting described above does not affect the display of images.

Image contrast can be adjusted using a separate procedure (See "To

adjust image contrast").

Auto Display Off

The watch automatically turns off its display

screen if it is not moved for about 60 minutes.

FRI

3‰

This not only conserves battery power, it also

1 ‰ : 5 8

protects against "burn in" of display images.

3 5

To turn the display back on, press F .

This displays the Timekeeping Mode screen.

2220-1