Casio 2273 Manuel de l'utilisateur

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Casio 2273. Casio 2273 10 pages. Casio pathfinder spf40: user guide

Imprimer la page

Module No. 2273

GETTING ACQUAINTED

Congratulations upon your selection of this CASIO watch. To get the most out

of your purchase, be sure to read this manual carefully and keep it on hand

for later reference when necessary.

• The measurement functions built into this watch are not intended for

taking measurements that require professional or industrial precision.

Values produced by this watch should be considered as reasonable

representations only.

• When using this watch to take readings while boating or engaging in

any other activity during which losing your way can create a dangerous

or life-threatening situation, always be sure to use a second compass to

confirm direction readings.

• The longitude, lunitidal interval, Moon phase indicator, and tide graph

data that appears on the display of this watch is not intended for

navigation purposes. Always use proper instruments and resources to

obtain data for navigation purposes.

• This watch is not an instrument for calculating low tide and high tide

times. The Tide Graph of this watch is intended to provide a reasonable

approximation of tidal movements only.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss,

or any claims by third parties that may arise through the use of this

watch.

GENERAL GUIDE

• If the digital display of your watch is continuously changing, see

"Auto Display Function" for information on how to stop it.

• The illustration below shows which buttons you need to press to navigate

between modes.

Countdown Timer/Stopwatch Mode

Alarm Mode

Moon phase indicator

Day of week

Tide graph

Seconds

Hour : Minutes

Year Month – Day

PM indicator

Warning!

Timekeeping Mode

Press B or C.

Press D.

Press B or C.

Moon/Tide Mode

TIMEKEEPING

In addition to normal timekeeping, use the

Timekeeping Mode to set the current time and

date.

• The Moon phase indicator shows the

current Moon phase.

• The tide graph shows the current tidal

movements.

Important!

• The watch cannot produce correct Moon

phase or tide graph data unless the

Timekeeping Mode current time and date

settings, as well as city data settings (GMT

differential, longitudes, and lunitidal interval)

are all correct.

About This Manual

• Press B to enter the Digital Compass Mode or C to enter the Barometer/

Thermometer Mode from the Timekeeping Mode or Countdown Timer/

Stopwatch Mode. To get to a sensor mode from the Moon/Tide or Alarm

Mode, you must go to the Timekeeping Mode first.

Press D.

• Having the batteries replaced causes the Timekeeping Mode's time/date

and city data settings to revert to their initial factory default settings. Use

the following procedure to set the current time and date, and to make city

data settings.

To reset the seconds count to zero

1. In the Timekeeping Mode, hold down A until the second's digits start to

flash, which indicates the setting screen.

2. Press E to reset the seconds count to

• Pressing E while the seconds count is in the range of 30 to 59 resets

the seconds to

the minutes count is unchanged.

3. Press A twice to exit the setting screen.

• Button operations are indicated using the

letters shown in the illustration.

• Each section of this manual provides you

with the information you need to perform

operations in each mode. Further details

and technical information can be found in

the "REFERENCE" section.

(Light)

Sensor Mode

Digital Compass Mode

Press B.

Press C.

Barometer/

Thermometer Mode

and add 1 to the minutes. In the range of 00 to 29,

2273-1