Casio 2752 Manuel d'utilisation

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Casio 2752. Casio 2752 6 pages.

Imprimer la page

1. Timekeeping

MO0402-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your

purchase, be sure to carefully read this manual and keep it on hand for later reference

when necessary.

• This watch does not have a time zone that corresponds to the Greenwich

Mean Time differential of –3.5 hours. Because of this, the radio-controlled

timekeeping and World Time functions will not display the correct time for

Newfoundland, Canada.

Expose the watch to bright light to charge its battery before using it.

You can use this watch even as its battery is being charged by exposure to bright

light.

• Be sure to read "Battery" of this manual for important information you need to

know when exposing the watch to bright light.

If the digital display of the watch is blank...

Power saving

indicator

• The Home City reverts to

configured to receive the Japanese time calibration signal, whenever battery

power drops to Level 4. If you are using the watch in North America, you will

need to configure your Home City code setting whenever battery power

recovers after dropping to Level 4. See "To set your Home City" for more

information.

General Guide

• Press C to change from mode to mode.

• In any mode, press L to illuminate the display.

Timekeeping Mode

Radio-controlled Atomic Timekeeping

Hour hand

Minute hand

Day of week

Seconds

Current Time Setting

This watch automatically adjusts its time setting in accordance with a time calibration

signal. You can also perform a manual procedure to set the time and date, when

necessary.

• The first thing you should do after purchasing this watch is to set your Home City,

which is the city where you will normally use the watch. For more information, see

"To set your Home City" below.

• When using the watch outside the ranges of the U.S. and Japanese time signal

transmitters, you have to adjust the current time setting manually as required. See

"Timekeeping" for more information about manual time setting.

• The analog time of this watch is synchronized with the digital time. Because of this,

the analog time setting is automatically adjusted whenever you change the digital

setting. See "Analog Timekeeping" for more information.

To set your Home City

City code

• Note that this watch does not have a city code that corresponds to Newfoundland.

3. Press A to exit the setting screen.

• Normally, your watch should show the correct time as soon as you select your Home

City Code. If it does not, it should adjust automatically after the next auto receive (in

the middle of the night). You can also perform manual receive or you can set the time

manually.

• If you are in an area that does not use Daylight Saving Time (summer time), turn off

the DST setting.

Operation Guide 2752

If the Power Saving indicator (

) is flashing on the

display, it means that the display is blank because the

watch's Power Saving function has turned it off to

conserve power. Power Saving automatically turns off the

display and enters a sleep state whenever your watch is

left for a certain period in an area where it is dark. If the

watch is kept in the dark for a longer period, the analog

hands will also stop moving after a few days.

• The initial factory default setting is Power Saving on.

• The watch will recover from the sleep state if you move it

to a well-lit area, if you press any button, or if you angle

the watch towards your face for reading.

• See "Power Saving Function" for more information.

TYO

(Tokyo), which means that the watch is

World Time Mode

Press C.

This watch receives a time calibration signal and updates

its time setting accordingly. The time calibration signal

includes both Standard Time and Daylight Saving Time

(summer time) data.

• This watch is designed to pick up the time calibration

signal transmitted in the United States (Fort Collins,

Colorado) and the time calibration signals transmitted in

Japan.

• The U.S. time calibration signal can be picked up by the

watch while in North America

The term "North America" in this manual refers to the

area that consists of Canada, the continental United

States, and Mexico.

1. In the Timekeeping Mode, hold down A until the city

code starts to flash, which indicates the setting screen.

2. Use D (east) and B (west) to scroll through the city

codes until the one you want to use as your Home City

is displayed.

• The following are the city codes for major cities in

North America.

LAX

: Los Angeles, San Francisco, Las Vegas,

Seattle, Vancouver, Tijuana

: Denver, El Paso, Edmonton, Culiacan

DEN

CHI

: Chicago, Houston, Dallas/Fort Worth, New

Orleans, Winnipeg, Mexico City

: New York, Detroit, Miami, Boston, Montreal

NYC

: All cities in Japan

TYO

About This Manual

• Depending on the model of your watch, display text

appears either as dark figures on a light background, or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the "Reference" section.

(Light)

Alarm Mode

Hand Setting Mode

To display the digital time and last signal screen

• In the Timekeeping Mode, press B to cycle through the digital time screens as

shown below.

• In the Timekeeping Mode, press D to display the last signal screen. The last signal

screen shows the date and time of the last successful time calibration signal

reception.

Day

Day of week

DST indicator

Press B.

Press D.

Seconds

Last Signal

Day of

Screen

week

Time Calibration Signal Reception

There are two different methods you can use to receive the time calibration signal:

auto receive and manual receive.

• Auto Receive

With auto receive, the watch automatically picks up the time calibration signal five

times a day at 0:00 a.m., 1:00 a.m., 2:00 a.m., 3:00 a.m., and 4:00 a.m. For more

information, see "About Auto Receive".

• Manual Receive

Manual receive lets you start a time calibration signal reception with the press of a

button. For more information, see "To perform manual receive".

Important!

• When getting ready to receive the time calibration signal, position the watch as

shown in the nearby illustration, with its 12 o'clock side facing towards a window.

Make sure there are no metal objects nearby.

Metal Band

Resin Band

• The watch should not be on its side or facing the wrong way.

Countdown Timer Mode

Stopwatch Mode

Seconds

Hour:

Month. Day

Minutes

indicator

Reception time

Reception date