Danfoss FH-CWD Instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Instruction pour {nom_de_la_catégorie} Danfoss FH-CWD. Danfoss FH-CWD 16 pages.

6. Maximum floor temperature

protection

The function allows you to set a maximum allowable

floor temperature if for instance you want to protect

real wood floors from damage due to excess heat. For

specific maximum floor temperatures please refer to

recommendations from floor suppliers.

Displaying the Floor Temperature

The function allows you to check the internal tem-

perature of the floor. Works only with floor sensor.

Turn ON the thermostat by pressing

• Press M Fig. 1  shortly and

display.

• The actual floor temperature is shown in the display.

Setting maximum floor temperature

Turn OFF the thermostat by pressing

• Press M Fig. 1  for 5 seconds until the display

shows

• Release M Fig.1 , and the display shows

• Press

floor temperature limit.

• Wait 5 seconds for the thermostat to exit SET mode

and power off.

VI.CU.B2.02

Fig. 1 to set the desired maximum

Produced by Danfoss Floor Heating Hydronics 05.2011

Instruction FH-CWD Thermostat

will flash in the

Fig. 1 .

Fig. 1 