Danfoss FH-CWP Manuel d'instruction - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Danfoss FH-CWP. Danfoss FH-CWP 20 pages.
Imprimer la pageInstruction FH-CWP Thermostat
• Press
Fig. 1 to accept this setting.
• Use
Fig. 1 to select the required temperature.
• Press
Fig. 1 to accept this setting.
Program 1, Event 2-4:
Repeat the Event 1 procedure for programming Event
2-4.
Program 2:
Sa. Su. are now shown in the display.
Program 2, Event 1:
• Use
• Press
Fig. 1 to accept this setting.
• Use
Fig. 1 to select the required temperature.
• Press
Fig. 1 to accept this setting.
Program 2, Event 2-4:
Repeat the Event 1 procedure for programming Event
2-4.
The thermostat will continue the 4-event pro-
gramme based on the present time and day.
Temporarily Setting and Changing the Desired
Room Temperature
• Press
or
desired room temperature value,
Produced by Danfoss Floor Heating Hydronics 05.2011
Fig. 1 to select the required start time.
Fig. 1 anytime to change the
is shown
VI.CU.C2.02
9