Danfoss RET B-LS Mode d'emploi

Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} Danfoss RET B-LS. Danfoss RET B-LS 2 pages. Thermostat for mansys cw-30 series for european market

Imprimer la page

man

SYS

M A N Systems Inc.

CW-30 SERIES THERMOSTAT

MODEL DANFOSS RET B – LS FOR EUROPEAN MARKET

Operating Instructions

Viewing Room Temperature and Unit Operation Status: The LCD will dis-

play the actual room temperature during normal operation. If the display is

blank, replace the batteries. Further, a snowflake symbol will appear on the

display when there is a demand for cooling (unit should operate when this

symbol is illuminated).

Setting the temperature: Turn setting dial. The display will flash indicat-

ing the setpoint temperature selected. After a short period, the display stops

flashing and shows actual room temperature.

Low Battery Indication and Changing Batteries: A battery symbol will flash

in the display when batteries require replacement. Batteries should be re-

placed within 15 days, after which the thermostat will turn off the unit. When

this happens, "OF" will be displayed. To avoid having this happen, replace the

batteries every 18 months. Thermostat takes 2xAA/MN1500 Alkaline Batter-

ies. Ensure that unit is unplugged or that electric circuit to unit is turned off,

prior to replacing batteries.

AUTO/OFF Switch: When the switch is set in the "O" position, thermostat will

turn unit off and "OF" is displayed.

http://www.mansystems.net

1-800-533-1712

[email protected]