Danfoss TP5000 RF Si Manuel d'installation et d'utilisation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Danfoss TP5000 RF Si. Danfoss TP5000 RF Si 14 pages. 5/2 day programmable electronic room thermostat
Également pour Danfoss TP5000 RF Si : Manuel d'instructions d'installation (14 pages), Instructions pour l'utilisateur (2 pages)
Imprimer la page
Before you start
Open the fl ap on the front of the
programmer.
Press the + & – AND L & M buttons
simultaneously to reset the unit.
This will reinstate the preset
programmes and will set the time to
12:00 on Day 1 and the temperature
to 20°C.
Setting the Clock & Day
Note: clock is displayed in 24 hour mode
CLOCK
Press PROG to begin programming.
Use + or - to adjust the TIME
(press and hold to change in 10 min
increments)
DAY
Press PROG again.
Use + or - buttons until correct DAY is
shown (1 = Monday, 2 = Tuesday, etc)
!
Remember - you will have to
reset the time when the clocks
change in Spring and Autumn.
8
i2 00