Danfoss AK-LM 330 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Danfoss AK-LM 330. Danfoss AK-LM 330 8 pages. Adap-kool refrigeration control systems

Imprimer la page

Menu list

Validity

Function groups

Measurements

Settings

This menu function can be used together with system software type AKM. The description is divided

up into function groups that can be displayed on the PC screen. Within each group it is now possible

to show the measured values, or settings. Regarding the use of AKM, reference is made to the AKM

Manual.

This menu operation (from September 2012) applies to controller type AK-LM 330, code Nos

080Z0170 with programme version 1.4x.

The various measurements can be read directly. If a graphic display of the measurements is required,

up to eight of them can be shown. Select the required measurements and push "Trend".

Settings can only be made for the daily operation. Configuration settings cannot be seen, changed or

written out. They can only be made from the Service Tool programme.

There are four kinds of settings, ON/OFF settings, settings with a variable value, time settings and

"reset alarms".

Set the required value and push "OK"

Menu operation RC8CC202 © Danfoss 09/2012

The operation is divided up into several

function groups. When a selection has been

made, push "OK", and you may continue to

the next display. By way of example, "Ther-

mostat 1-4" has been selected here.

From the measure line the different val-

ues can be read. The values are constantly

updated.

In the list of settings the set values can be

seen. If a setting has to be changed, select

the parameter and proceed via "OK".

Enter the new value or move the sliding scale up or down.

The new value will apply, when "OK" is pushed.

AK-LM 330 Vers. 1.4x