Danfoss M46 Installation électrique - Page 5

Parcourez en ligne ou téléchargez le pdf Installation électrique pour {nom_de_la_catégorie} Danfoss M46. Danfoss M46 12 pages. Hc edec

Electrical Installation

Product overview

M46 Pumps HC EDC

M46 Pump

M46 model code

C D E F G

M P V

046

N—control options

Code

Description

EDC, high current, 12 volt, Deutsch

EDC, high current, 24 volt, Deutsch

M46 pumps are designed for medium power applications with maximum loads of 345 bar [5000 psi].

These pumps can be combined with other products in a system to transfer and control hydraulic power.

M46 pumps provide an infinitely variable speed range between zero and maximum in both forward and

reverse modes of operation.

M46 pumps are compact, high power density units. All models use the parallel axial piston / slipper

concept in conjunction with a tiltable swashplate to vary the pump's displacement. Reversing the angle

of the swashplate reverses the flow of fluid from the pump, reversing the direction of rotation of the

motor output.

M46 pumps may include an integral charge pump to provide system replenishing and cooling fluid flow,

as well as servo control fluid flow. M46 pumps feature a range of auxiliary mounting pads to accept

auxiliary hydraulic pumps for use in complementary hydraulic systems.

M46 pumps offer proportional controls with either manual, hydraulic, or electronic actuation. An electric

three-position control is also available.

L1427804 • Rev AB • September 2015

connector, 2-pin

P200148