Dunlop L.312.C.M Manuel d'installation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dunlop L.312.C.M. Dunlop L.312.C.M 18 pages. Auxiliary air suspension

Imprimer la page

Mercedes-Benz Sprinter 200/300

5.7 Spring Alignment

Spring out of alignment—

mounting

offset

CAUTION!

Before fully tightening the bolts that secure the air spring to the

upper and lower brackets, set the vehicle at ride height (spring

height approximately 13.5cm) and ensure that the springs are

correctly aligned.

5.8 Maintenance

Following installation, it is recommended that all metal parts are coated

with a protective substance such as body wax.

The system does not require very much maintenance other than...

to maintain air pressure in the springs. Much like a tyre, the system

♦

may lose a little air over time.

to keep the air bellows clean. It is suggested that, when washing

♦

the vehicle, the bellows are inspected and cleaned as necessary

(preferable by spraying).

trapped between convolutes, as this may damage the bellow.

DUNLOP and the Flying D Device are trademarks of Dunlop International Group and are used under license by DSC Nederland B.V.

L.312.C.M

Spring

plate

axes

mounting plates parallel

and coaxial

Look in particular for stones or grit

Volkswagen Crafter 28-35

alignment—