Danfoss iC7 Series Manuel d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Danfoss iC7 Series. Danfoss iC7 Series 10 pages. In-bottom/out-back cooling kit for fa09-fa10, frequency converters
Également pour Danfoss iC7 Series : Manuel d'installation (8 pages), Manuel d'installation (8 pages), Manuel d'installation (6 pages), Manuel d'installation (14 pages), Manuel d'installation (16 pages), Manuel d'installation (8 pages), Manuel d'installation (8 pages), Manuel d'installation (16 pages), Manuel d'installation (16 pages), Manuel d'installation (6 pages), Manuel d'installation (6 pages), Manuel d'installation (16 pages), Manuel d'installation (18 pages)

Imprimer la page
Danfoss iC7 Series Manuel d'installation
Installation Guide
In-back/Out-back Cooling Kit for
FK11/FB11 and FK12/FB12
iC7 Series Frequency Converters
1 Overview
1.1 Description
The in-back/out-back cooling kit fits iC7 Series FK11/FB11 and FK12/FB12 Frequency Converters. When the kit is installed, air flows
into the lower back duct and out through the upper back duct. See
1
2
3
Illustration 1: Direction of Airflow with Kit Installed
1
Top cover
2
Cabinet
3
Pedestal
1.2 Kit Numbers
Use these instructions with the following kits.
Table 1: Kit Numbers for In-back/Out-back Cooling Kits
Kit number
176F4168
176F4169
1.3 Items Supplied
The following parts are contained in the kit.
Danfoss A/S © 2022.08
4
5
6
Kit description
Cooling kit, In-Back/Out-Back FK11/FB11
Cooling kit, In-Back/Out-Back FK12/FB12
Illustration
1.
4
Cooling back channel
5
Air flow direction
6
Bottom cover
AN361429087579en-000101 / 136R0289 | 1