Casio WVA-107HD-7AV Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Casio WVA-107HD-7AV. Casio WVA-107HD-7AV 5 pages.

Casio WVA-107HD-7AV Manuel d'utilisation
Operation Guide COMBIWVGE1
• Normally, the signal reception date shown by the Last Signal screen is the date data
included in the received time calibration signal. When only time data is received,
however, the Last Signal screen shows date as kept in the Timekeeping Mode at the
time of signal reception.
• If you are in an area where proper time calibration signal reception is impossible, the
watch keeps time within ±20 seconds a month at normal temperature.
• If you have problems with proper time calibration signal reception or if the time
setting is wrong after signal reception, check your transmitter, current city code, DST
(summer time), and auto receive settings. The following are the initial factory defaults
for these settings.
Setting
Initial Factory Default
Transmitter
A/T
City code
LON
(London) (Modules 2734, 3749, and 4774)
BER
(Berlin) (Modules 2758, 3748, and 4773)
DST (summer time)
A
(Auto switching)
DST
Auto receive
ON
(Auto receive)
R/C
Transmitters
This watch is designed to receive the time calibration signal transmitted from Rugby,
England and the signal from Mainflingen, Germany. You can select either one of the
transmitters, or you can configure the watch to automatically select the transmitter that
has the strongest signal.
• The following explains how the watch determines which transmitter it should check
first while the watch is configured for auto transmitter search (
Modules 2734, 3749, and 4774
In this case:
The first signal auto search operation
after factory default settings are in effect,
or after the city code has been changed
Any case other than the above.
Modules 2758, 3748, and 4773
In this case:
The watch does this:
The first signal auto search operation
1. Checks the Mainflingen signal first.
after factory default settings are in effect,
2. If the Mainflingen signal cannot be
or after the city code has been changed
Any case other than the above.
1. Checks the last successfully received
2. If the last successfully received signal
• Since the watch checks signals from both transmitters when
transmitter setting, the signal receive operation can take as long as 12 minutes.
• To find out the module number of your watch, look at its
2734
back cover. The Module number (2734, 2758, 3748,
3749, 4773, or 4774) will be engraved inside the box on
2758
the back cover.
To select a transmitter
1. In the Timekeeping Mode, hold down A until the
transmitter indicator starts to flash, which indicates the
setting screen.
2. Use D to scroll through available transmitter settings
until the one you want to select is displayed.
To set up the watch to do this:
Automatically select the Rugby or Mainflingen signal
Receive the Mainflingen signal
Receive the Rugby signal
• Note that
---
appears in place of the transmitter indicator when any city code
LON
PAR
BER
ATH
besides
,
,
, or
indicates that you cannot specify a transmitter.
3.Press A twice to exit the setting screen.
Timekeeping
• Resetting the seconds to
00
while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to
00
without changing the minutes.
• The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
• The year can be set in the range of 2000 to 2039.
• The watch's built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch's battery replaced.
• The current time for all city codes in the Timekeeping Mode and World Time Mode is
calculated in accordance with the Greenwich Mean Time (GMT) differential for each
city, based on your Home City time setting.
• GMT differential is calculated by this watch based on Universal Time Coordinated
(UTC*) data.
* The letters "UTC" stands for "Universal Time Coordinated," which is the world-wide scientific
standard of timekeeping. It is based upon carefully maintained atomic (cesium) clocks that
keep time accurately to within microseconds. Leap seconds are added or subtracted as
necessary to keep UTC in sync with the Earth's rotation. The reference point for UTC is
Greenwich, England.
12-hour/24-hour Timekeeping Formats
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also
applied in all other modes.
• With the 12-hour format, the P (PM) indicator appears on the display for times in the
range of noon to 11:59 p.m. and no indicator appears for times in the range of
midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59. The
indicator 24 indicates the 24-hour format.
A/T
).
The watch does this:
1. Checks the Rugby signal first.
2. If the Rugby signal cannot be received,
checks the Mainflingen signal.
1. Checks the last successfully received
signal first.
2. If the last successfully received signal
cannot be received, checks the other
signal.
received, checks the Rugby signal.
signal first.
cannot be received, checks the other
signal.
A/T
is selected as the
Select this transmitter setting:
A/T
DCF
MSF
is selected as the Home City code. This
Illumination Precautions
The watch has an EL (electro-luminescent) panel that causes the entire display to
glow for easy reading in the dark.
In any mode, press B to illuminate the display for about one second.
• The electro-luminescent panel that provides illumination loses power after very long
use.
• Illumination may be hard to see when viewed under direct sunlight.
• The watch may emit an audible sound whenever the display is illuminated. This is
due to vibration of the EL panel used for illumination, and does not indicate
malfunction.
• Illumination turns off automatically whenever an alarm sounds.
• Frequent use of illumination runs down the battery.

City Code Table

City
GMT
City
Code
Differential
– – –
–11.0
Pago Pago
HNL
Honolulu
–10.0
Papeete
ANC
Anchorage
–09.0
Nome
San Francisco, Las Vegas, Vancouver,
LAX
Los Angeles
–08.0
Seattle/Tacoma, Dawson City
DEN
Denver
–07.0
El Paso, Edmonton
Houston, Dallas/Fort Worth,
CHI
Chicago
–06.0
New Orleans, Mexico City, Winnipeg
Montreal, Detroit, Miami, Boston,
NYC
New York
–05.0
Panama City, Havana, Lima, Bogota
CCS
Caracas
–04.0
La Paz, Santiago, Port Of Spain
RIO
Rio De Janeiro
–03.0
Sao Paulo, Buenos Aires, Brasilia, Montevideo
– – –
–02.0
– – –
–01.0
Praia
GMT
Dublin, Lisbon, Casablanca, Dakar, Abidjan
+00.0
LON
London
PAR
Paris
Milan, Rome, Madrid, Amsterdam, Algiers, Hamburg,
+01.0
BER
Berlin
Frankfurt, Vienna, Stockholm, Barcelona
ATH
Athens
Helsinki, Istanbul, Beirut, Damascus,
CAI
Cairo
Cape Town
+02.0
JRS
Jerusalem
JED
Jeddah
+03.0
Kuwait, Riyadh, Aden, Addis Ababa, Nairobi, Moscow
THR
Tehran
+03.5
Shiraz
DXB
Dubai
+04.0
Abu Dhabi, Muscat
KBL
Kabul
+04.5
KHI
Karachi
+05.0
Male
DEL
Delhi
+05.5
Mumbai, Kolkata, Colombo
DAC
Dhaka
+06.0
RGN
Yangon
+06.5
BKK
Bangkok
+07.0
Jakarta, Phnom Penh, Hanoi, Vientiane
Singapore, Kuala Lumpur, Beijing, Taipei, Manila, Perth,
HKG
Hong Kong
+08.0
Ulaanbaatar
SEL
Seoul
Pyongyang
+09.0
TYO
Tokyo
ADL
Adelaide
+09.5
Darwin
SYD
Sydney
+10.0
Melbourne, Guam, Rabaul
NOU
Noumea
+11.0
Port Vila
WLG
Wellington
+12.0
Christchurch, Nadi, Nauru Island
• Based on data as of June 2006.
Other major cities in same time zone
5