Danfoss VLT FC 103 Manuel d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Danfoss VLT FC 103. Danfoss VLT FC 103 16 pages. Igbt module replacement for d1h–d8h drives
Également pour Danfoss VLT FC 103 : Manuel d'utilisation (16 pages), Manuel d'installation (20 pages), Manuel d'instructions d'installation (6 pages), Manuel d'installation (18 pages), Manuel d'instructions d'installation (8 pages), Manuel d'instructions d'installation (10 pages), Manuel d'installation (6 pages), Manuel d'utilisation (16 pages), Manuel d'installation (8 pages), Manuel d'instructions d'installation (6 pages), Manuel d'installation (6 pages)

Installation Guide | VLT® Programmable I/O MCB 115

Procedure

1. Remove the LCP, the terminal cover, and the LCP frame from the drive.

2. Fit the option into slot B.

3. Connect the control cables and relieve the cable. See

4. Remove the knockouts in the extended LCP frame (supplied).

5. Fix the extended LCP frame and terminal cover on the drive.

6. Fit the LCP or blind cover in the extended LCP frame.

7. Connect power to the drive.

8. Set up the input/output functions in the corresponding parameters.

1 LCP

3 Slot B

5 LCP frame

Illustration 1:

Installation in Enclosure Sizes A2, A3, and B3

3.3 Mounting the Option in Enclosure Sizes A5, B1, B2, B4, C, D, E, and F

Context:

The installation procedure depends on the enclosure size of the drive. This procedure is for installation in enclosure sizes A5, B1, B2, B4,

C, D, E, and F.

3.4.1 Specifications

for wiring details.

2 Terminal cover

4 Option

AN295938195323en-000101 / 130R0655| 9

Installation