Airwell AW-WHPMA16-91 3ph Installation et configuration - Page 9
Parcourez en ligne ou téléchargez le pdf Installation et configuration pour {nom_de_la_catégorie} Airwell AW-WHPMA16-91 3ph. Airwell AW-WHPMA16-91 3ph 15 pages.
Imprimer la page
Set T4H2
This will give a weather compensated curve of 45 degrees flow temp
at
-
2 degrees outside and a Flow temp of 30 degrees at 1
outside
ambient air temprture
All change
Press Back
Se
Change Room Thermos
Zone
Pre
Pre
To Activate the Weather Compensated Curve entered earlier, the next steps must be followed.
From the main screen press Menu button
Select Pre-set temperature and press
Go across to Weather Temp. Set
Scroll down to Zone1 H-Mode low temp,
Press the
Scroll right to the Number 9 and Confirm with
Press Back, until you return to the Home Screen.
The unit can be put into a Test mode, this is done through the SERVICEMAN menu accessed as above.
In the Test mode menu, there are a couple options that can be selected in this menu, these include testing of all Outputs.
This will allow the installer to check the unit has been wired correctly, there is also a handy air purge function within this menu.
We recommend that the air purge function is carried out before initially starting the unit. Please Find below the details
Enter SERVICEMAN mode using the password as
Detailed in the previous section.
Scroll down and Select Test Run with
W: www.aukdistribution.com
, set to
15
c ֯
s to selections must be confirme
lect Room Thermostat
tat to
1
ss
OK
ss Back Twice to return to the home screen
ON/OFF
button to turn on.
on carrying out this process.
T: 0191 516 6553
5
degrees
d
with
OK
OK
OK
Test Mode
OK