Dunster House Artemis P3-3050PRG Manuel d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dunster House Artemis P3-3050PRG. Dunster House Artemis P3-3050PRG 17 pages. Pergola 3m x 5m
Assembly Instructions for Artemis Pergola 3m x 5m
Components required for Step 1
4x 145x145x2260.A
**Avoid splitting timber by pre-drilling ALL screw holes**
Step 1.
Prepare 2 assemblies of the beams and posts using 2x post 145x145x2260.A and 1x beam 140x45x3200.B2
for each assembly. Fix by screwing through the posts and into the beams using 4x 120mm Screws.
Position 140x45x3200.B2
with notches facing
upwards.
140x45x3200.B2
120mm Screw
145x145x2260.A
145x145x2260.A
Posts and beams layout
Ensure that the diagonals A & B are equal.
145x145x2260.A
140x45x3200.B2
145x145x2260.A
2250
145x145x2260.A
140x45x2645.A
140x45x2645.A
145x145x2260.A
2x 140x45x3200.B2
8x 120mm Screw
Make sure that the notches in
the beam are in line with the
cut-outs in the posts.
120mm Screw
4935
145
2250
140x45x2600.A
140x45x2600.A
3200
105
2700
2990
Please note that
this layout
is to assist you
with Step 2.
145x145x2260.A
140x45x3200.B2
145x145x2260.A
105
105
Page 03