Free The Tone ARC-4 Manuel du propriétaire - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Free The Tone ARC-4. Free The Tone ARC-4 16 pages. Audio routing controller
Également pour Free The Tone ARC-4 : Procédures de mise à jour du micrologiciel (18 pages)
Imprimer la page
Setting MIDI Control Change Number to be Sent (Preset Mode)
1. Press the MODE switch to select Preset mode.
2. Use the BANK /L8 or BANK /STORE switch to select the desired target
bank.
3. Use the PS/L switch to select the desired target preset.
4. Press the SELECT switch to select "CSW(#CC)" and to turn on the LED.
5. Press and hold down the ON/OFF 1–8 switch for about 3 seconds to select
"CSW (control switch)" to be used.
6. Press the UP or DOWN switch to select the item you want to setup.
7. Turn the PARAMETER encoder to set the parameter.
8. Press the ENTER switch to return to Preset mode.
How to Perform Detailed Settings of ARC-4 (Edit Mode)
Detailed settings of the ARC-4 are done in Edit mode.
Hold down the MODE switch
1
for about 3 seconds. The
Display-1 shows MENU and
the Display-2 shows MENU
SELECT.
2
Press the PS/L switch to select the menu to be set.
5
When completed, press the MODE switch to return to usual operation mode.
Basic Operation
1. Hold down the MODE switch for about 3 seconds. The Display-1 shows
"MENU" and the Display-2 shows "MENU SELECT."
2. Press the PS/L switch to select the menu to be set.
3. Press the ON/OFF 1–8 switch to select the desired item in each menu and
press the ENTER switch to confirm.
4. Turn the PARAMETER encoder or press the UP/DOWN switch to edit the
parameter.
5. When completed, press the MODE switch to rerutn to usual operation
mode.
12
Parameter 1: CSW switches (shown as CSW on Display-1) 1 to 8
Parameter 2: MIDI control change numbers (shown as CC on Display-1) 001
to 128
Parameter 3: MIDI channels (shown as CH on Display-1) 1 to 16
Parameter 4: (operation method) LATCH, MOMENTARY1 (MOM1),
MOMENTARY2 (MOM2), ONSEND, VALUE
Parameter 5: (only when VALUE is selected in Parameter 4) ON (000 to 127),
OFF (NON, 000 to 127)
NOTE
The MIDI channel (CH) must be the same as that of the connected MIDI device. The
Display-2 shows all of the information at once.
4
Turn the PARAMETER encoder or press the UP/DOWN switch to edit the parameter.
Press the ENTER switch to confirm.
3
Press the ON/OFF 1–8 switch to select the desired item in
each menu and press the ENTER switch to confirm.
N.B. The PARAMETER encoder can be used to select
menu items.
ENTER
PS/L Switch Menus
PS1/L1:
PRESET (Copying/Deleting of each preset and bank)
PS2/L2:
TITLE (Naming presets, banks, etc.)
PS3/L3:
SET LIST (Setting of setlists)
PS4/L4:
MIDI (Setting of MIDI)
PS5/L5:
CSW/TAP (Setting of CSW transmission and TAP tempo input)
PS6/L6:
SET UP (Basic settings of ARC-4's operations)
PS7/L7:
UTILITY (Useful functions of ARC-4)
Screens Displayed in Edit Menu Operation and Flow of Setup Operation
< When Copying a Preset >
PS-CP
FROM
ENTER
PARAMETER
UP/DOWN
NOTE: In Edit mode, changes are accepted when the ENTER switch on the control panel is pressed. It is not necessary to press the STORE switch.
PRESET: PS1/L1 switch
Presets and banks set in Preset mode are copied or deleted in these configuration modes.
Copying Presets (PS-CP): ON/OFF switch 1
PS-CP
FROM
ENTER
PARAMETER
UP/DOWN
Turn the PARAMETER encoder or press the UP/DOWN switch to select the source preset.
Turn the PARAMETER encoder or press the UP/DOWN switch to select the destination preset.
N.B. The destination preset will be overwritten.
Parameter: 001-01 to 200-10 (default = 001-01)
Copying Banks (BK-CP): ON/OFF switch 2
BK-CP
FROM
ENTER
PARAMETER
UP/DOWN
Turn the PARAMETER encoder or press the UP/DOWN switch to select the source bank.
Turn the PARAMETER encoder or press the UP/DOWN switch to select the desitination bank.
N.B. The presets in the destination bank will be overwritten.
Parameter: BNK001 to BNK200 (default = BNK001)
Deleting Presets (PS-DL): ON/OFF switch 3
PS-DL
ENTER
Turn the PARAMETER encoder or press the UP/DOWN switch to select the preset to be deleted.
Parameter: 001-01 to 200-10 (default = 001-01)
TO
DONE
ENTER
ENTER
PARAMETER
UP/DOWN
TO
DONE
ENTER
PARAMETER
ENTER
UP/DOWN
TO
DONE
ENTER
PARAMETER
ENTER
UP/DOWN
DONE
001-01
ENTER
PARAMETER
UP/DOWN
13