Duolabs Qbox One Manuel d'utilisation rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation rapide pour {nom_de_la_catégorie} Duolabs Qbox One. Duolabs Qbox One 15 pages. Dvb-s sat receiver

Imprimer la page

Installation

Turning the device on

- Turning the device on

- Insert 2 AA (1,5V) batteries, taking care to observe the + and - markings indicated inside, into the remote control.

- Before using the QBox, please read the safety instructions.

- Connect the LNB or antenna with a coaxial cable to LNB or Antenna In at your QBox.

- Connect the QBox with a Scart cable to your television screen.

- Plug in the power cable into a 230V/50Hz power socket.

- If you are using a switchable power socket please shutdown your QBox into deep standby before switching off the

power socket.

- If you switch on your QBox for the first time, you will see the setup wizard. The setup wizard will guide you through

the first time installation. You will be asked for your TV standard, the regional settings and your language. Please

choose and follow the instructions on the screen.

- Please note that the video format meets the factory setting CVBS (FBAS).

From here on, please follow the instructions on the screen.

For some special features regarding the non-standard ENIGMA functions please refer to the

appendix on this user guide.

For full detailed information refer to the full User Manual Downloadable from the official QBox

web site: