Duolabs Season Wireless Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Duolabs Season Wireless. Duolabs Season Wireless 14 pages.
Imprimer la page
Season Wireless – User Manual
www.duolabs.com
– All rights reserved
Connections
The Slave needs to be connected to an external 9 V power supply. Therefore,
the card has a standard power connector and a small connector for the
connection of the 9 V battery. The Slave also has a connector for the insertion
of the smartcard, which is used to log the traffic between the smartcard and
the remote device.
The Master is powered by the USB port that connects it to the PC. This port is
also used to transmit configuration commands, while the smartcard emulation
data is transmitted through the RS-232 serial port. This ensures maximum
compatibility with the software applications used with Season Logger 2.
The Slave and Master can be connected to one another through their 20-pin
male-female connectors if it is necessary to upgrade the internal firmware.
Both units have a connector for the wireless antenna. It is important to make
sure that the antennas are correctly positioned on each of these units and that
their orientation complies with the instructions given on next 2 images.
Both units also have red and yellow LEDs that light when the units are being
powered and when the firmware is upgraded. The Master also has an
additional green LED that lights when data is being transmitted to/from the PC
through the RS-232 serial port.
3