AudioCodes Mediant 500Li MSBR Manuel d'installation rapide - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} AudioCodes Mediant 500Li MSBR. AudioCodes Mediant 500Li MSBR 10 pages. Analog voip gateway
Également pour AudioCodes Mediant 500Li MSBR : Manuel d'installation rapide (10 pages)
Imprimer la page
Assigning an IP Address
You can manually assign a static IP address to the device or you can use a DHCP server to dynamically assign an
IP address to the device. This is configured through the device's Command-Line Interface (CLI).
To assign an IP address:
1.
Connect the device's RS-232 serial port, located on the rear panel and labeled CONSOLE, to the serial
communication port on your computer (serial cable is not supplied).
2.
Insert the DC plug, located at the end of the power cord of the supplied AC/DC power adapter, into the
device's power socket located on the rear panel and labeled POWER. Plug the power adapter directly
into a standard electrical wall outlet. Switch on the device by pressing-in the ON/OFF power button
located next to the socket. The Power LED on the front panel should turn on (green).
6 |
P a g e