AudioCodes MP-100 Manuel de démarrage rapide
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} AudioCodes MP-100. AudioCodes MP-100 17 pages.
Imprimer la page
AudioCodes™ MP-100/104 Gateway
Quick Start Installation Guide
INTRODUCTION
This quick start guide contains information about how to install and configure the Audio-
Codes™ MP-100/104 Gateway. Although this guide covers both the MP-100 and MP-104
Gateways, the installation instructions apply to the MP-104. This gateway is the latest version
that is available through the Inter-Tel
refer to the latest version of the IP Devices Manual.
SYSTEM REQUIREMENTS
The following lists the system requirements for installing the AudioCodes MP-100/104 Gate-
way:
•
•
SYSTEM DATABASE PROGRAMMING
The IPRC firmware version determines how Axxess is programmed to support the gateways.
For details about system database programming, refer to the documents listed below.
If you are installing the gateway on a:
•
•
AUDIOCODES MP-100 GATEWAY INSTALLATION
For details about installing the AudioCodes MP-100, refer to the latest version of the IP
Devices Manual.
Document Part Number 835.2741-3
A946/3852A
AudioCodes™ MP-100/104 Gateway Quick Start Installation Guide
Internet Protocol Resource Card (IPRC) firmware v1.3 or later
NOTE:
To support Session Initiation Protocol (SIP) on the AudioCodes MP-100/104
Gateway, v1.5 or later firmware is required.
®
Axxess
v7.0 or later
V1.x firmware IPRC, see the latest version of the IP Devices Manual.
V8.x firmware IPRC, see the Addendum to the v8.0 Installation and Maintenance Man-
ual.
®
CommSource™ division. For details about the MP-100,
© Inter-Tel, Inc. March 2004 printed in USA
March 2004
Page 1 of 17