Free2Move eSolutions Annex Manuel d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Free2Move eSolutions Annex. Free2Move eSolutions Annex 11 pages. Advanced functionalities setup
Également pour Free2Move eSolutions Annex : Manuel d'installation (14 pages)
Imprimer la page1.
INTRODUCTION
Dynamic Power Management (DPM) is a smart function that allows you to recharge
your electric vehicle using only the power available at home, modulating the
charging power and avoiding unpleasant blackouts. If you are using other
appliances during the charging session, the system can modulate the charging
power towards the car, even suspending temporarily the charging session. As soon
as the other domestic appliances are switched off, the session will resume at
maximum power.
Load unbalance detection, is a specific function for power management. According
to relevant standards for specific countries, the current unbalance among the
phases must not differ by more than a fixed value (different for each country). This
function avoids single phase on board chargers to withdrawn from the grid an
unbalanced current higher than prescribed by local regulation.
Do not try to install the Power Meter if you are not qualified as a
professional electrician. Such behavior can cause serious danger and harm
to you and to the people, things or animals around you.
The wallbox can work without Dynamic Power Management.
In this case, the installation of a dedicated PowerMeter is not necessary,
but avoidance of blackouts is not guaranteed.
Please refer to local regulations and user and wallbox installer manuals on
www.esolutions.free2move.com/document-library/ for more information
about the installation process.
Only Power Meters provided by Free2move eSolutions S.p.A. are
compatible. Installation must be performed by qualified personnel in
accordance with local regulations.
Installation manual - Annex
A d v a n c e d f u n c t i o n a l i t i e s s e t u p