Addlogix KVM-801PREU-OSD Manuel d'installation rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Addlogix KVM-801PREU-OSD. Addlogix KVM-801PREU-OSD 2 pages. Powerreach elite hd. 8/16-port cascadable rackmount usb ps/2 kvm switch w/ osd

Imprimer la page

QUICK REFERNCE SHEET for Addlogix KVM Switch -- Operation Commands

Hotkey sequence = [ScrLk]

Command

ScrLk + ScrLk + (a) + (b) + (y) + (z)

Select Computer

(ab = bank no. ; xy = channel no.)

Next lower channel

ScrLk + ScrLk + ↑ (arrow up)

Next higher channel

ScrLk + ScrLk + ↓ (arrow down)

Next lower bank

ScrLk + ScrLk + PgUp

Next higher bank

ScrLk + ScrLk + PgDn

Autoscan Beep Sound

ScrLk + ScrLk + B

On/Off

Define Hotkey Preceding

Sequence

Load Factory Default [All]

Change Computer Name

Reset

Initialize

KVM

ScrLk + ScrLk + End

(whole daisy-chain)

Show OSD Menu

ScrLk + ScrLk + (Space Bar)

ScrLk + ScrLk + S

Autoscan

Stop Autoscan

Any key

Autoscan Period

[5 ~ 10 ~ 95 seconds]

Auto Logout Timeout

Enable/Disable

[0 ~ 99 min ]

OSD Menu Timeout

[0 ~ 60 ~ 95 seconds]

OSD Title Bar On/Off

ScrLk + ScrLk + T

[ON/OFF]

OSD Title Bar Position

[Left/Right]

Setup Password

[Disable/Enable]

Notes:

1. OSD Menu control is only available when the OSD menu is activated on the screen. To activate the OSD menu, use the hotkey sequence ScrLk + ScrLk + (Space Bar). For detailed OSD operation reference,

please refer to the User Guide. When OSD Menu is active, the mouse will be locked until the OSD Menu is off.

2. Note that a, b, y and z each denotes a number key. (ab) = 01 ~ 16 ; (yz) = 01 ~ 08. For example, ScrLk + ScrLk + 03 + 06 is for bank 3 port 6. When using a single KVM Switch configuration, the default bank no.

is 01, therefore hit ScrLk + ScrLk + 01 + 12 for port 12 for a single KVM Switch configuration.

3. The password is up to 8-character length. You should remember the password since it is required for access to your KVM switch once you enable the password protection for your KVM switch. However, if you

forget the password and thus are blocked from KVM access, you should contact your local dealer for tech support.

Quick Reference Sheet

+ [ScrLk]

+ Command key(s) * User-definable Preceding sequence = SCROLL LOCK, CAPS, ESC, F12 or NUM LOCK

Hotkeys

OSD control

Cursor keys to navigate

Enter to select

Cursor keys to navigate

Enter to select

Cursor keys to navigate

Enter to select

PgUp (w/ OSD Menu)

PgDn (w/ OSD Menu)

Main Menu/Setup/Hotkey

[ SCROLL LOCK, CAPS, ESC,

F12 or NUM LOCK]

Main Menu / Setup / Load

Default [Load Default All]

Cursor keys to navigate

Enter (Ins) to select/edit

Main Menu / Setup /

Autoscan period

Main Menu / Setup / Auto

Logout

Main Menu / Setup / OSD

Timeout

Main Menu / Setup / Title

Bar

Main Menu / Setup / Setup

Password

Hotkeys/ OSD Menu / Front-Panel Buttons

Front-panel

Press corresponding button yz on Switch

ab for channel yz on bank ab.

Press corresponding button

Press corresponding button on that

switch

Press corresponding button on that

switch

Press any push button

Description

Select the active bank (switch) and channel

Select the next lower connected channel within

the current active bank

Select the next higher connected channel

Select the next lower bank (switch) when with

multiple daisy-chained units

Select the next higher bank (switch ) when

with multiple daisy-chained units

Toggle on/off the beep sound for switching

confirmation while autoscanning

Select the hotkey preceding sequence among 5

alternative keys

Restore the EEPROM [all] settings to the

factory default

Change the computer name

[max. length = 8 alphanumeric characters]

Reset the KVM Switch / initialize the daisy-

chain setup

Activate the OSD Menu on the console screen

Autoscan through every connected channel for

quick screen browsing of each channel.

Terminate Autoscan activity

Specify delay time within a range of 5 ~ 99

seconds [default = 10 sec ]

Specify the time out for auto logout -- screen

/keyboard/mouse locked after timeout period

for security. (default = 0 = disable)

Specify the timeout for OSD menu

[default = 60 seconds; 0 = disable]

Enable/disable the OSD Title Bar

[default = ON]

Select the OSD title bar position on your screen

Enable/disable password protection

[default == disable; password length <= 8

characters]