AETOOL BESA 11 Manuel de démarrage rapide - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} AETOOL BESA 11. AETOOL BESA 11 8 pages. Battery electrical system analyser
Imprimer la page
6. LIMITED WARRANTY
This Battery Electrical System Analyser BESA11
is warranted to be free from defects in material
and workmanship for a period of 12 months from
the date of purchase and is subjected to the
following terms and conditions:
6.1 Within the
manufacturer will repair or replace, at
their options, any defective parts and
return to the owner in good working
order.
6.2 Any repaired or replaced parts will be
warranted for the balance of the
original warranty or 90 days from the
date of repair, whichever is longer.
6.3 Cost of delivery charges incurred for
the repair of the product (to and from
the manufacturer) will be borne by
the owner.
6.4 The warranty covers only the defects
arises as a result of normal use and
does not cover those arise from:
•
Unauthorized
repair
•
Improper operation or misuse
•
Accident
dropping onto hard surfaces.
•
Contact with water, rain or extreme
humidity or heat.
•
Physical damages such as cables
broken, surface cracks, etc.
warranty period,
the
modification
and
or
neglect
such
Performing Battery Test while it is still in the
car:
Vehicle that was running has to have its engine
OFF first and then switch ON the headlights for
30 seconds to remove the surface charge. After
the headlights had switched OFF, let the battery
rest for at least 1 minute to recover before
testing commences.
The car engine and all other accessory loads
must be OFF during test in order to have an
accurate result. When attaching the analyser
clips, make sure that the battery posts were not
oxidized or badly corroded. Clean them first
before clamping to it. Do not clamp onto the
as
steel bolts directly which may give inaccurate
and inconsistent results.
Testing on stand-alone batteries:
Clean the battery posts with a wire brush prior
testing. For side- post batteries, install stud
adaptors. Do not use steel bolts for better
results.
Caution: Never lay tools on the
battery top. You may short the
terminals together causing harm
to yourself, the tools or the
battery. Always follow Battery
Council
International
recommendations.
Warning:
Battery
contain lead compounds which
is hazardous to our body if
consumed. Please wash your
hand
immediately
handling.
safety
terminals
after