freecam C381U Manuel de l'utilisateur

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} freecam C381U. freecam C381U 2 pages. Wireless solar powered garden light camera

C381U Wireless Solar Powered
Garden Light Camera
User Manual
Shenzhen Leshi Video Technology Co., Ltd.
www.freecamglobal.com
Solar panel
LED Switch Hole
LED Light
Battery camera
Lens
Status Indicator②
PIR sensor
Microphone
2
Camera Indicator Light Status
Camera LED
Indicator light status
Purple Power indicator on
Purple Power indicator on
and goes out
Indicator blue light blinks
Indicator Red Light Blinking
Slowly
Indicator Red Light Blinking
fastly
Indicator off
* If it red blinks over 2 minute and still can't connect success, please
reset device and check the router's WiFi signal.
®
V1.0
Infrared LEDs
Charging Indicator①
USB charge socket
Power switch
Speaker
TF card slot
Reset button
Status
Charging
Charge complete
Waiting for connecting
Connecting to WiFi
Connect to the server
Normal working or
power off
The C381U is an intelligent solar powered garden light camera.
● Perfect for garden and pathways – The solar-powered garden
light camera combines garden lights and rechargeable security
cameras, full wireless design is the best choice for outdoor home
security;
● Powered by the sun– place your Freecam Smart garden Light
Camera in direct sunlight to recharge and store power,It can work
continuously;
● Monitor your home security – a real-time notification will push to
the connected smart phone when motion is detected;Equipped
with 2-way audio and support view live video to stay in-the-know
when anything happens at home;
● Built-in 16GB TF Card – When motion is detected, the built-in TF
card will automatically store the video, which is safer than cloud
storage and there is no subscription fee.
1
Exterior diagram
184mm
3
Accessories
USB charging cablex1
Manual x2
Screw set x1
Lamp Pole(30cm)x2
4
Installation Illustration
The C381 can be mounted on ground or on a wall.
1 Before installing the camera,please connect the USB cable to the camera
and a DC5V/1A mobil phone adaptor, then charge the camera untill the
charging indicator light goes off,For the first time please charege the camera
over 6 hours.
2 Install the camera in the place with a strong WiFi signal.
2.1 Turn on the power button,blue light will be blinking,if it is not at this
condition please press and hold the reset button for 3-5 seconds.
56mm
Metal Plugx1
Basex1
Mounting Platex1
Wall Mount Bracketx1