3Ware 3WARE 9650SE Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 3Ware 3WARE 9650SE. 3Ware 3WARE 9650SE 11 pages. Remote battery board
Également pour 3Ware 3WARE 9650SE : Addendum au manuel de l'utilisateur (1 pages), Spécifications (7 pages), Manuel d'installation (4 pages)

Imprimer la page
Creating RAID Units
Creating RAID Units
2

Related Documentation

The following additional documentation is available:
•
The installation guide that came with your 3ware RAID controller tells
you how to physically install a 9690SA or 9650SE controller and the
BBU (battery backup unit).
•
3ware SAS/SATA RAID Software User Guide provides general
information about using the 3ware RAID controller and the 3ware RAID
management software utilities 3BM (3ware BIOS Manager) and 3DM2
(3ware Disk Manager).
Notes:
3DM2 is not yet supported for OpenSolaris.
Primary storage is not yet supported for OpenSolaris.
•
3ware SAS/SATA RAID Controller CLI Guide provides information on
using the 3ware Command Line Interface (CLI).
These guides are available in PDF format in the /doc folder of the CD you
create from the downloaded CD image. They can also be downloaded
individually from the 3ware website at
http://www.3ware.com/support/userdocs.asp.
Additional support information is available in the 3ware Knowledgebase, at
this website:
http://www.3ware.com/KB
You can create one or more RAID units either before or after you install the
software.
To create a RAID unit or units
1
Install your 3ware RAID controller as described in the installation guide
for the controller. You can download an electronic version from
http://3ware.com/support/userdocs.asp.
2
Use 3BM (3ware BIOS Manager) to create one or more RAID units on
the 3ware RAID controller. You can access 3BM by pressing Alt-3 during
system startup.
Instructions for creating units using 3BM are available in Chapter 3,
"First-Time RAID Configuration Using 3BM" in the 3ware SAS/SATA
RAID Software User Guide.
You can also use the CLI to create RAID units. For details, see the 3ware
SAS/SATA RAID Controller CLI Guide.
3ware® SAS/SATA RAID Software User Guide Addendum for OpenSolaris