AudioControl LL-6.1200 Manuel de démarrage rapide - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} AudioControl LL-6.1200. AudioControl LL-6.1200 17 pages. High-power multi-channel amplifier
Imprimer la page
System #2: Bi-amping front outputs; using an external subwoofer amplifier
ACR-1
Notes:
The +12V Power and Ground connections are not shown
The LC-6.1200 turns on when an audio signal on inputs 1 and 2 is sensed by the GTO (GTO switch is ON)
The remote trigger then becomes an output to turn on the remote trigger of the subwoofer amplifier
Speaker outputs 1 and 2: Stereo, 3.5 kHz and above, plays inputs 1 and 2, no AccuBASS or ACR-1 effect
Speaker outputs 3 and 4: Stereo, bandpass 90 Hz to 3.5 kHz, plays inputs 1 and 2 (as SUM is on), no AccuBASS or ACR-1 effect
Speaker outputs 5 and 6: Stereo, 90 Hz and below, plays inputs 5 and 6, no AccuBASS or ACR-1 effect
Line outputs: use ACR-1 to adjust subwoofer level, and use AccuBASS controls. (Line out always affected by ACR-1 and AccuBASS)
Factory
Remote trigger
Radio
EPICENTER 600 Subwoofer Amplifier
Set to 90 Hz
Line-Level
Rear Speaker-level output
Front Low Speaker-level output
Subwoofer
+
+
Front L/R tweeters
Speaker-level output
3.5 kHz and above
+
+
Front L/R Woofers
Speaker-level output
90 Hz to 3.5 kHz
+
Rear L/R
Speaker-level output
90 Hz and above
11