AudioControl ACX-3.2 Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} AudioControl ACX-3.2. AudioControl ACX-3.2 20 pages. All-weather equalizer & crossover with paging mic

Imprimer la page

A Guided Tour of the ACX-3.2

1. Volume Control – Because the ACX-3.2 is a true pre-amp, it serves as the

main control unit in the audio system. It has a master volume control that

controls the output to all of your amplifiers.

2. Power LED – When the ACX-3.2 is powered on, this blue LED will shine

bright and proud.

3. Fader – When amplifier channels are connected to the front and rear

outputs, the fader control will allow you to fade the signal level back and

forth.

4. Sub Level – Exactly what it says it is. Controls the amount of signal that

goes to the subwoofer output of your ACX-3.2.

5. Equalize – Push this button in to active the EQ. When the button is out, EQ

is bypassed.

6. ParaBASS® Controls – Two simple controls allow for killer bass tweaking.

7. Graphic Equalization Bands – Three stereo controls centered at 125 Hz,

8. Microphone Input Jack – Connect the included paging microphone here.

The sweep knob selects the center frequency, between 40 Hz and 80 Hz.

The gain knob provides 10 dB of boost or cut, centered around the sweep

frequency.

1.25 kHz, and 10 kHz with 10 dB of boost or cut. These controls should

be used to tweak your system, depending upon your mood or program

material.

The microphone cable connector should be secured to this input using its

integrated locking ring.

Owner's Enjoyment Manual