AudioControl BVR-10 Manuel d'installation et d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AudioControl BVR-10. AudioControl BVR-10 20 pages. Cat-5 balanced video/audio driver cat-5 balanced video/audio receiver active-balanced series
Imprimer la pageA
CTIVE
The BVD-10 and BVR-10 are capable of extending two
video channels. This can be two separate composite video
signals OR one S-video signal. The reason you are limited
to one S-video signal is that it is actually comprised of two
video signals; the Chroma and the Luminance. In applica-
tions where you need to
extend a component video
signal, you may use the RCA
video inputs on two pairs of
BVD/R. This gives you the 3
channels of video required
(plus a spare).
Important Note: You cannot simultaneously use the
Composite and S-video connectors on either unit.
The BVD-10 and BVR-10 automatically adapt a compos-
ite video input on
the BVD-10 to an
S-video output on
the BVR-10 (or
vice versa). To use this
feature, connect the com-
posite video signal to Input 1
on the BVD-10 and connect
to the S-video output on the
BVR-10.
Installation Note: The com-
posite to S-Video feature does not
function on Video Input #2.
-B
ALANCED
Video connectors on BVD/R
Adapting composite to S-video
5