audiodata ArtTwo Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} audiodata ArtTwo. audiodata ArtTwo 17 pages.

Setting the speakers up

Spatial acoustics is a complex subject, on which some very good and detailed literature

is available from specialist retailers. More precise details would go beyond the scope

of this manual. Using the following basic knowledge, you will, however, quickly achieve

good results.

In essence, the arrangement of the loudspeakers within the room as well as the latter's

shape, furnishings and fixtures have a decisive influence on the sound quality. The aim

is to achieve a balanced frequency response and good spatial reproduction at the spot

where the listener is positioned.

We would encourage you to experiment a bit with the set-up of the loudspeakers and

the listening position. The drawing below shows the basic loudspeaker set-up. Even

minor shifts or angling in of the loudspeakers can produce an audible improvement in

the reproduction.

Recommendation:

Basic width

Distance from wall - side / to rear

Listening distance



The speakers should be set up in such a way that there is no risk of them toppling over or

of tripping over a cable.



Pick a stable, level surface.



Ensure that the surrounding area is dry and free of dust.



Avoid proximity with any sources of heat and with direct sunlight.



Do not put any heavy objects on top of the cables or loudspeakers.



Make sure that the loudspeakers sit firmly on the surface in order to avoid any vibrations.

A few tips and recommendations for fully utilising the acoustic potential:



Position the loudspeakers within the room as clear of any obstructions as

possible. Wherever possible, the distance from the walls should be at least 0.5

ArtTwo

1st edition, January 2019

> 2 metres

> 0.5 metre

> 2 metres

Page 7