Audiodesign Gipsy 2x8 MKII Manuel du propriétaire - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Audiodesign Gipsy 2x8 MKII. Audiodesign Gipsy 2x8 MKII 4 pages. Portable acoustic guitar amplifier/battery powered portable amplifier
Imprimer la page
Portable Acoustic Guitar Amplifier
Congratulations on choosing a guitar amplifier of the Gipsy series .
It is a latest generation product with generous performance that,
thanks to the battery, integrated inside, allows maximum versatility
and flexibility of use.
Main features:
* Fully portable with Li Ion battery (up to 8-10 hours working time)
* Bluetooth connection: to reproduce music in connection with a
computer , a smartphone, a tablet or a portable MP3 reader
* USB Reader (for MP3 and WAV files)
* USB Recorder (WAV files)
* Ch1, Balanced Input for acoustic guitar with Bass, Mid, High and
Effects controls
* Ch2, Unbalanced Input for microphone or instrument with Bass,
Mid, High and Effect controls
* - 10 dB pad on Ch1 and Ch2
* Ch3, Stereo 3,5 mm Jack Input: to connect and external source
-10dB
MID
Reverb /Reverb+Delay1 /Reverb+Delay2 /Oct- /Oct+ /Chorus
(1)
(3)
(8)
(4)
(5)
(6)
(7)
(2)
(20)
Gipsy 2x8
(18)
(16)
(14)
EFX SEL
/
-10dB
MID
/
R e c o r d
(15)
(13)
(12)
(3)
(8)
(4)
(5)
(6)
(9)
(10) (11)
(7)
(22)
Balanced
(23)
(21)
MKII
Connections and controls:
1. Input Ch 1: ACOUSTIC GUITAR - Balanced 6.3 mm Jack, input
impedance 10 KOhm
2. Input CH2: MICROPHONE or INSTRUMENT - Unbalanced XLR
or 6.3 Jack, impedance 1 KOhm
3. Volume Ch 1 and Ch2
4. Bass: Adjust low tones on Ch 1 or Ch2 - 60 Hz +/- 15 dB
5. Mid: Adjust the mid tone on Ch1 or Ch2 - 1500 Hz +/- 15 dB
6. High: Adjust high tones on Ch 1 or Ch2 - 10 KHz +/- 15 dB
7. Effect : Adjust the total effect level on Ch 1 or Ch2
8. -10 PAD push buttons: to reduce the signal level on Ch1 or Ch2
9. EFX SEL: to select the effect: When switched on the Gipsy 2x8 is
set to REVERB effect. Pushing the button you can select in sequence:
Reverb+Delay1 / Reverb+Delay2 / Oct - / Oct + / Chorus)
10. Input Ch 3 AUX IN/RECORD: Jack 3,5 stereo with 3 or 4
contacts. If you use a 4 contacts Jack, you can record the program in
your smartphone (the volume doesn't depend on master setting). This
Ch is managed by master volume only.
11. Master: Adjust the volume of signal to send to the amplifier.
12. V-: a short pressure means "NEXT". A long pressure reduce the
volume
13.Mode: A short pressure pause the reproduction. A long pressure
change the function between Bluetooth / USB reader and USB
FOOT
SWITCH
recording. These last two functions are available only if a USB key is
(17) (19)
inserted.
14. V+: A short pressure means "PREVIOUS". A long pressure
increase the volume.
15. Mode: Pushing this button, there is the choice between 5 different
tone preset or a flat response.
16. USB: Insert a USB key or use to power ( 5V) an external device.
(If used to power a device of course the battery life will decrease)
17. Foot Switch: Allow to select the effects by an external foot switch
Gipsy 2x8
Portable Acoustic Guitar Amplifier
4
MKII